Add a Key to a Key Ring
A key ring keeps keys together and often holds a key fob to help keep the whole bunch from getting lost. Springy key rings can be a bit fiddly to work with, but once on, they'll hold keys well.
Contents
Steps
- Look for clasps and releases. Most key rings are like springs, but some have clasps that open directly. The rest of this article is about the spring style key rings.
- Choose where you want the key. If you have several keys on the ring already, you may want to place the key in a certain place in the sequence. Push the other keys to the side and work in the space where you want the new key. Also decide which way you'd like the key to point, with relation to the key ring and the other keys.
- Pull open the ring, just far enough to get the key under it. You can jam a thumb or fingernail in, or you can use a slender object, such as a paper clip or screwdriver, to spare your nails.
- Push the separated end through the hole in the key, so that the key is in between the coils. The key will hold the coils open.
- Rotate the key ring around, pushing the key through it until the key is in the ring.
Tips
- The same sort of technique works for other things you might want on your key ring, such as key fobs, additional rings, and so on.
- Key rings are inexpensive. If yours is the wrong size or is stretched out, get a new one.
- Don't pull the key ring open too hard or too far. It may not spring back.
- Staple removers can help keep a key ring in its open state.
Warnings
- Don't allow your key ring to get too cumbersome. It can strain your ignition.
Related Articles
- Make a Key Ring with a Sponge
- Make a Wine Corkscrew out of an Ordinary Key Ring
- Bend a Key
- Make a Key Necklace
