Calculate Distance Travelled by Pacing

Pacing is the practice of calculating the distance you have traveled based on the number of steps you have taken. This can be a very handy piece of knowledge, especially if you're out hiking or walking and you need to determine where you are on a trail or map.

There are generally two types of pacing, namely single and double pacing. Single pacing is counting every single step you take, while double pacing counts only on right or left foot steps.

Steps

Track method

1. Find a measuring resource. To find out what your pacing is, you will need some way to measure the distance you are going to cover. Some parks and cycling tracks have distances marked on the ground. A running track could also serve the purpose. Locate such a measuring resource so that you can work out your pacing using the following steps.
2. Figure out whether you want to calculate your pacing in single or double steps. Double steps has the advantage of being half the number of steps to count!
3. Go to the starting marker on the track. Choose a suitable length to check yourself against – 200 meters or 200 yards is a good distance to calculate your pacing fairly accurately.
4. Walk the distance you have chosen and count your pacing as you move forward. When you reach the end, take note of the number and divide it by 2. You will then get the number of steps you take to cover 100 meters or 109 yards.
   • Somewhere between 55 to 70 double pacing steps is normal for most people. If you are using yards, 60 to 76 double paces is the normal range.
5. Confirm your pacing by walking back the exact same distance you have covered. Calculate your pacing for 100 meters or 109 yards and check to see if it is the same. If it is not the same, average the number to find your usual level of pacing. If needed, you could pace another distance to confirm your pacing.
6. Apply your knowledge of your pacing to distance measurement to simple activities to test out your accuracy.
   • Calculate the distance of a short walk, say from your home to a local store.
   • Calculate a walk around a park.
   • Calculate as you walk to work in the morning.

Wet feet method

1. Find a clear sidewalk or pathway. Fetch a tape measure.
2. Fill a bucket with water. Pour this water down the sidewalk or pathway where you are going to walk. Make sure there is enough water to pool.
3. Start walking through the water at your usual pace. Continue to walk beyond the water for another 10 strides.
   • Walking through wet sand might also work for this method, provided you have a tape measure handy.
4. Measure the distance from the heel of your left footprint of each of the wet left footprints.
5. Average the distance measured to gauge your distance covered.

Tips

• A pedometer or a GPS set to walking mode would help you to calculate the distance covered.
• A person's pacing is never consistent. Some factors that will affect the accuracy of pacing include:
  • Fatigue level - You walk more slowly when you are tired.
  • Weather - You walk more slowly in hot weather.
  • Terrain - Upward slopes cause lower pacing and downward slopes increase pacing.
  • Group walking - You may walk faster or slower depending on the group speed.
  • Carrying weight - The more weight on you, the slower you will walk.
  • Growth - If you are a teenager, your pacing should increase as you grow taller.
• Be sure to assume a comfortable pace, this method will be useless if you are taking bigger or smaller than comfortable strides, as you will always gravitate back to that "comfortable" size pace.

Warnings

• Watch out for traffic, cyclists, and other people!

Things You'll Need

• A track with distance measurements painted on the ground; or
• A bucket of water and a measuring tape

Related Articles

• Pace Yourself when Running
• Pace Yourself While Biking
• Run Faster
• Train for the 800 Meter Race in Track and Field
• Win a Running Race

Sources and Citations

• http://www.nalno.com - Original source, shared with permission.

See also

• Find Direction Without a Compass
• Use a Compass
• Read UTM Coordinates
• Determine Latitude and Longitude
• Read a Map
• Orienteer
• Use a Map
• Walk a Compass Bearing