Drive a Car in Reverse Gear

Driving in reverse can be intimidating to inexperienced and seasoned drivers alike. Because the wheels you use to steer are in front of you as you move backwards and your vision is obscured by the vehicle, backing up can be one of the tougher tasks faced by drivers. By driving slowly and paying close attention to your surroundings, you can improve your ability to drive in reverse.

Steps

Backing Up in a Straight Line

  1. Conduct a “360 degree check.” A “360 degree check” is when you actively turn your head and shoulders to look all around your vehicle in a complete circle. Make sure there is nothing in your way or moving toward you that you may need to take into account before backing up.[1]
    • It’s okay to use your mirrors to aid in your check, but it’s important that you actively look around to ensure you don’t miss anything.
    • Make sure to look toward the ground on either side of your vehicle using your head and mirrors to ensure there are no people or animals laying in your path.
  2. Place your right foot on the brake. When driving forward or in reverse, your right foot should be the only one on the gas or brake pedal. If your car is equipped with a standard transmission, your left foot manages the clutch, but in vehicle’s with automatic transmissions, the left foot simply goes unused. Press your right foot on the brake pedal firmly, so that the vehicle won’t move once it is in reverse.[1]
    • The brake pedal is in the middle on vehicle’s equipped with a standard transmission and is the furthest to the left in automatic vehicles.
    • The brake pedal is the widest pedal.
  3. Put your left hand on the top middle of the steering wheel. While it may be customary to drive with your hands at ten and two o’clock on the steering wheel, backing up will require that you turn your body to the right. Place your left hand at the top of the wheel so you can easily make small adjustments to keep the vehicle moving straight as you back up.[1]
    • It may be difficult to reach the steering wheel with your right hand while backing up, so steering with one hand is optimal.
  4. Put the vehicle in reverse. Depending on the transmission your vehicle came equipped with, there are a few ways you may need to shift into reverse. On automatic vehicles, it usually requires pressing a button on the shift lever and pulling it backward until it is aligned with the letter “R.” In standard vehicles equipped with a five speed transmission, you can usually shift into reverse by pressing the shift lever all the way to the left and pulling it backward.[1]
    • In vehicles equipped with six speed standard transmissions, reverse is usually all the way to the left and up, next to first gear.
    • Some cars require that you press down on the shift lever or press a release to access the reverse gear.
    • If you are unsure of how to shift into reverse, refer to your vehicle’s owner’s manual.
  5. Look out the back of the car over your passenger side shoulder. Provided your view is not obstructed, twist your body to the passenger side so you can look out the back window of your vehicle over your right or passenger side shoulder. Make sure you do not remove your foot from the brake pedal. If you are driving a box truck or other vehicle that blocks your view out the back window, you will have to rely on your side mirrors to guide you.[1]
    • You may choose to place your right hand on the top of the passenger seat to help you comfortably look out the back.
    • If you are relying on your mirrors, make sure to check each of them frequently.
  6. Ease your right foot off the brake slowly. As you take the pressure off of the brake pedal with your right foot, the vehicle will begin to move backward. Most vehicle’s engines idle at a high enough RPM (revolutions per minute) to propel the vehicle without any need to apply the gas.[2]
    • Ease off the brake slowly to ensure you do not accelerate too quickly to easily manage.
    • Press back down on the brake pedal to slow your vehicle down while backing up.
    • If your vehicle is equipped with a standard transmission, you will need to use the gas as you ease off the clutch, but can then allow the vehicle to idle.

Turning as You Back Up

  1. Turn the wheel in the direction you want the back of the car to turn. The dynamic of driving in reverse is quite different than that of normal driving because the wheels you turn to steer are at the front of the car. As you back up, make small adjustments by turning the wheel in the direction you want the back of the car to turn toward.[3]
    • Turning the wheel to the left as you back up will cause the back of the car to go left and vice versa.
    • Stop the car if you feel uneasy about the direction it is heading, then set off again once you’ve gained control.
  2. Check the clearance of the front end. As you turn the vehicle, the front end of the car will swing in the opposite direction the back end is turning. Check the area around the front of the car frequently as you back up slowly to ensure you don’t hit or run over anything with the front wheels.[4]
    • If you are turning left as you back up, the front of the car will swing to the right, and vice versa.
    • Make sure you are going slowly enough that you can check the front of the car for clearance without hitting anything.
  3. Transition your right foot to the gas pedal if needed. If you are backing up a hill or need to turn, you may need to utilize the gas pedal occasionally while backing up. Once your right foot is completely off of the brake, move it over the gas pedal to the right of the brake. Press down on the pedal slowly to control the amount of speed you pick up as you back up.[1]
    • Make subtle adjustments to your speed by applying pressure to the gas pedal.
    • Bring your foot back to the brake once you have gained sufficient speed or if you need to slow back down.
  4. Use two hands to steer when turning. If you need to turn around an obstacle while backing up, you may want to use both hands to manipulate the steering wheel. Using one hand, you can usually only turn the wheel up to ninety degrees in each direction, so if you need to take a steeper turn, using both hands may help. Make sure that you can still see behind you as you place your right hand back on the wheel if you need to.[3]
    • Never cross your hands over one another while turning the wheel. Instead push the wheel with one hand and pull it with the other.
  5. Never go faster than you feel comfortable controlling. Backing up can feel quite different than driving forward, and your view is often compromised by the back of the car and a limited view out of your window. Do not hurry yourself while backing up and instead take your time to prevent accidents.[3]
    • Never drive your vehicle in a manner that feels unsafe.
    • Feel free to stop the vehicle and take a minute if you feel uncertain about what you’re doing.
  6. Press the brake with your right foot firmly to stop. When you’ve backed up far enough, press your foot back down on the brake pedal gradually to come to a smooth stop. Be careful not to apply too much pressure too quickly, or you will stop the vehicle abruptly.[1]
    • Use only your right foot to apply the brakes in your vehicle.
    • Keep your foot pressed on the brake once the vehicle has stopped.
  7. Put the vehicle in park or set the parking brake when you’re done. With your foot firmly on the brake pedal, press the button the shift lever in automatic vehicles and press it forward until it is aligned with the “P” that indicates that it is in park. In standard transmission equipped vehicles, simply take the shift lever out of gear (in neutral) and apply the parking brake by pulling up on the handle or pressing down on the pedal.[1]
    • If you are unsure where to locate your parking brake or how to engage it, refer to the vehicle’s owner’s manual for guidance.

Backing Up Using Your Mirrors

  1. Check your mirrors before you begin. If you cannot see out the back of the vehicle, you will need to use your side mirrors to see as you back up. Before you begin, adjust your side mirrors to ensure you can see the side of the vehicle, the ground, and anything coming up from behind you.[5]
    • In many cars you can adjust both mirrors from the driver’s seat, but in some you may need to adjust them manually by hand on each side.
  2. Check each mirror frequently. Using mirrors will only show you what is behind your vehicle on either side, so it’s important to check both sides often. This will prevent you from accidentally hitting something, or from not noticing as someone approaches from one side or the other.[5]
    • You likely will need to drive even slower in reverse when using mirrors to be sure you don’t miss anything.
    • It may help to pay closer attention to the mirror on a side with an obstacle, so you can keep your eyes on it.
  3. Enlist the help of a friend. If you are backing up using only your mirrors in a difficult area, you may choose to ask a friend to guide you. Using your mirrors to keep an eye on a friend that is checking your clearances from the back may be your best option when driving a box truck or something else with severely limited visibility.[5]
    • Have your friend stand behind the vehicle on one side to ensure you can see them as they guide you.
    • Make sure to open your windows and turn off the radio to hear your friend’s instructions as you back up.

Related Articles

Sources and Citations

You may like