Intonate a Guitar

A guitar's intonation determines whether it is tuned across the fretboard. To have perfect intonation, the strings must be an equal distance on the 12th fret from the nut to the bridge. If your strings are not, then playing higher notes on your fretboard will sound out of tune. In order to combat this, proper intonation is key for any guitar. Luckily, there are easy ways to check if your guitar is correctly intonated and some ways that you can adjust your string length to fix the guitar's intonation.

Steps

Checking if Your Guitar is in Tune

1. Purchase a chromatic tuner. Even if you're a seasoned guitarist, it's still hard to hear exact notes and it can be difficult to determine whether strings and notes are flat or sharp. A chromatic tuner is an electrical device that you can plug into your guitar using a standard 1/4" instrument cable. Chromatic tuners can be purchased at most music stores or online.
   • If you can't buy a tuner, there are apps online that may also act as a tuner.
   • Some tuners will work with electric and acoustic guitars.
   • If you want a more exact tuner, you can purchase a strobe tuner.
2. Tune your guitar to the standard tuning. The standard tuning on a guitar starting from the thickest string, or the 6th string, is E, A, D, g, b, e. Plug the 1/4" cable from your guitar to the input of the tuner. Strum the top string on your guitar and rotate the tuning knobs on the headstock until your tuner's needle is in the center of an E note. Continue to do this to all of your strings until your guitar is in the standard tuning.
   • Tuning your guitar in standard tuning will enable you to hear if notes down your neck are flat or sharp.
3. Hold down the 12th fret on the high e string and see if it's in tune. Now move down your neck and hold down the 12th fret on the high e string. The note should be the same as it was when you played the open string. If the needle on the tuner is left of the 12 o'clock position, your string is flat. If the needle is on the right side of the 12 o'clock position, it means that your string is sharp.
4. Continue to check each of the strings on the 12th fret. Check the other strings to see if they are in tune just as you did with the high e string. Take note of whether your strings are flat or sharp so that you can make the proper adjustments when setting the guitar's intonation.

Setting an Electric Guitar's Intonation

1. Loosen the strings to give the saddle freedom of movement. The saddle is the part of your guitar that's below the pickups, on the opposite side of your headstock. If you've never adjusted the guitar's intonation, your saddle might be more difficult to move. Before you adjust the position of the saddle, loosen the strings so that you don't create unnecessary tension on the strings which could cause them to snap.
   • If the saddle is being difficult, you can wiggle it back and forth with your fingers until it moves.
2. Loosen the screw on the saddle if your string is flat. If your note is flat, you'll want to move the saddle up towards the headstock. Loosen the screw a quarter turn to sharpen your note. You may have to do this several times before the string on the 12th fret is correct.
3. Tighten the saddle screw if the note is sharp. Use a screwdriver to tighten the screw on the saddle if the string that you're playing is sharp. This will move the saddle away from the headstock and will flatten the note on the 12th fret.
4. Retune your strings. Once you've made adjustments with your screwdriver, you can re-tune your strings. Test the note on the 12th fret and take note of whether you corrected the problem. If you turned the screw too far, your string might be off the correct tuning. If this is the case, then loosen the string again and adjust the screw more until the string plays in tune, on the 12th fret.

Fixing an Acoustic Guitar's Intonation

1. Try to use different strings. While rare, it's possible that the manufacturer made an error when producing your strings. Intonation may also be affected by old, worn out strings. Before adjusting your guitar's intonation, make sure that the bad intonation is being caused by your guitar and not your strings.
2. Take your guitar to a luthier. A luthier is a person who specializes in repairing stringed instruments. Because an acoustic guitar's saddle doesn't move, you can't simply tighten or loosen screws as you would do on an electric guitar. If you value your acoustic guitar and don't want to damage or destroy it, take it to a certified professional instead of trying to modify the guitar yourself.
   • A luthier will be able to adjust neck and bridge to affect the action of your guitar, file nuts down, and replace the bridge completely if need be. These are all things that should be handled by a professional.
   • Even if you have a cheaper acoustic guitar, it still may be worth it take your badly intonated guitar to a luthier rather than attempting to fix your guitar yourself and breaking it.
3. Replace the guitar's saddle. Replacing your guitar's saddle can fix the intonation. To do this, remove all of the strings from your guitar. Use needlenose pliers to loosen the saddle from its casing and carefully pull it from its hole. Then, push your new saddle into the saddle hole firmly to secure it. Once it's in place, restring your guitar and tune it.
   • Before replacing your saddle, make sure that you measure the length of your existing saddle so you can get the right size.

Using an Emergency Fix on an Acoustic Guitar

1. Loosen the string that you need to adjust. You'll need to loosen the string that you want to set to relieve tension on the string as you work on other steps. You don't have to remove the strings completely but loosen them enough so that you have room to work under them on the neck.
2. Find a screw that's the same height as the guitar nut. The guitar nut is on the top of your neck, near the headboard. It's what the strings are pulled over before they are wrapped around the tuning pegs. Find a screw that's about the same height as the guitar nut and one that can fit snugly under the strings of your guitar. You may have to search around at a hardware store until you find the right sized screw.
3. Break the screw into a quarter inch (0.63 cm) piece. Cut off a piece of the screw by bending it back and forth with needle nose pliers. You need the piece of the screw to be small enough so that it can fit under a particular string but not affect the rest of the strings on your neck.
4. Slide the screw under the string between the first fret and the nut. This piece of metal will affect the strings intonation. The higher that you slide the screw towards the nut the higher your pitch will be. The closer that you slide the screw to the fret, towards the bridge, the lower or flatter the note will be. Continue to adjust the metal until your note is in tune.

Things You’ll Need

• Chromatic tuner
• Instrument cable
• Phillips head screwdriver
• Small screw
• Needlenose pliers
• Nail file

Related Articles

• Easily Detune a Guitar
• Tune Your Guitar in Dropped C
• Clean Guitar Strings
• Make Guitar String Wraps on Your Guitar

Sources and Citations

See also

• Tune a Guitar Harmonically
• Clean Guitar Strings
• Get a Pick out of a Guitar
• Restring a Guitar
• Tune a Guitar
• Set Your Guitar's Intonation
• Repaint a Guitar
• Change Guitar Strings
• Connect a Guitar Pedal
• Take Care of a Guitar

Read more ...

What links here

• Connect a Guitar Pedal
• Play Rock'n'roll Guitar in 3 Simple Steps
• Take Care of a Guitar
• Tune a Guitar by Ear