Kill Black Mold

Black mold is a type of fungus that can grow indoors. Like all molds, black mold loves moist environments, so areas that are often damp, such as wet basements, showers, bathrooms, and areas where there's a leak, are prone to mold growth. Because some kinds of black mold can cause allergic reactions, asthma attacks, and respiratory issues, it’s important to remove it when you do find it in your house. The trick to killing black mold is penetrating the mold and killing the roots as well, and taking steps to ensure it doesn’t return.

Steps

Taking Safety Precautions

1. Seal the area. To prevent mold spores from becoming airborne and spreading, you can seal the room. Put up sheets of plastic to cover doors and vents that lead to other areas of the house. Use painter’s or construction tape to tape the plastic in place and seal the room.
   • Sealing the area is a precaution you can take if you're worried about mold spores spreading, but it’s important to note that mold spores are always present in the air, and that mold can grow anywhere that there's moisture.
2. Open windows. Mold itself and the cleaning products you use to kill it can irritate eyes, skin, and lungs, so you must provide yourself with as much fresh air as possible. In the area where you're going to be attacking the mold, open as many windows as possible.
   • In winter when it’s cold out, open at least one or two windows to let in some fresh air.
3. Turn on vents and fans. To provide extra ventilation and circulation while you're working, set up some fans and turn on vents that can blow air from the room outside. This will blow any mold spores outside rather than letting them float around in the air.
4. Wear personal protective equipment. Mold exposure can cause upper respiratory illness, and the cleaners you use to kill the mold may also be damaging and corrosive. To protect yourself while you're cleaning, consider wearing protective gear, including:
   • Safety goggles
   • Non-porous gloves
   • Mask or respirator
5. Don’t mix cleaning solutions. You will have to choose a cleaning solution to kill the mold, and it’s important that you stick to that one cleaner. Mixing different cleaners can be very dangerous, and you can create unexpected chemical reactions.
   • Never mix ammonia or bleach together or with any other household cleaners.
6. Consider replacing absorbent materials. Removing mold from absorbent materials can be extremely difficult. Instead, most professionals will recommend that you remove and replace such items, since it probably won’t be possible to remove the mold without damaging the material or causing further problems.
   • Absorbent materials that may need to be replaced include drywall, ceiling tiles, furniture and carpeting.

Cleaning Affected Areas

1. Scrub the affected area with soapy water. Fill a bucket with warm water, and add 2 tablespoons (30 ml) of liquid dish soap. Swish the soap around in the water to make suds. Dip a stiff-bristled brush into the soapy water and scrub the moldy surface with the brush. Re-dip the brush regularly and scrub until the area is saturated with suds. Rinse the area with water.
   • Pre-scrubbing the mold will help break up the surface so that you can penetrate to the roots with your cleaner and kill the mold.
2. Mix your cleaning solution. There are a number of cleaning solutions and products you can use to clean mold. As long as you penetrate to the roots, they should all be effective at killing the mold. For liquid solutions, combine the ingredients in a spray bottle. Cleaning solutions you can try include:
   • Equal parts ammonia and water
   • 1 cup (235 ml) of bleach mixed with 1 gallon (3.8 L) of water
   • Pure distilled vinegar
   • 1 teaspoon (5 ml) of tea tree oil and 1 cup (235 ml) of water
   • Equal parts baking soda and water, mixed into a paste in a bowl
   • One part hydrogen peroxide mixed with two parts water
   • 1 cup (409 g) of borax dissolved in 1 gallon (3.8 L) of water
   • ¼ cup (102 g) of borax dissolved in ½ cup (118 ml) of vinegar and 4 cups (940 ml) of warm water
   • Commercial biocide or antimicrobial cleaner
3. Apply cleaner and let it soak. For liquid solutions, spray generous amounts of cleaner on the moldy surface that you pre-scrubbed. For pastes, apply the paste to the affected area with a knife, brush, or old tooth brush.
   • Let the cleaner stand for about 15 minutes. This will give it time to penetrate the mold and kill it all the way to the roots, which will prevent it from growing back.
4. Scrub porous materials. When the cleaner has had time to soak in, scrub the surface with a stiff-bristled brush. This will help dislodge the mold and work the cleaner in even farther.
   • You can use an non-abrasive scrubbing pad to scrub the area as well.
5. Rinse and dry the area. To remove any leftover mold and cleaner, rinse the area with clean water. When the mold and cleaner are gone, wipe the area dry with a towel or a squeegee. This will remove excess moisture and prevent the mold from growing back.
   • Mold can start growing on a damp surface within 24 hours, which is why it’s important to keep the area dry after cleaning.

Preventing Black Mold

1. Remove the source of moisture. As long as there's a moisture source, there's the potential for mold. After cleaning your mold problem, it’s essential that you remove the source of the moisture that caused the mold to grow in the first place. Depending on where in the house the mold was, possible moisture problems could include:
   • Leaks
   • Floods
   • Spills
   • Dampness from cooking or bathing
   • Lack of moisture barrier in the basement
2. Lower the humidity. Mold thrives in humid environments where the moisture levels are above 50 percent. To prevent mold, install a hygrometer and keep and eye on the humidity levels. When it gets too high, ways to reduce humidity include:
   • Running a humidifier
   • Running the air conditioner
   • Opening windows
   • Increasing ventilation
   • Opening windows and using vents when cooking
3. Dry your shower after bathing. Showers and tubs are common places for mold to grow because they stay wet all the time. To prevent this, keep a squeegee in the bathroom and ask that all family members and guests wipe down the walls after bathing.
   • You should also open a window or turn on the bathroom fan anytime somebody uses the bathroom to bathe or shower.
4. Fix leaks immediately. Leaks are a huge source of moisture problems in homes, and the extra moisture creates a prime environment for mold to grow. You can still prevent mold even if a leak occurs, but you do have to act quickly to fix the leak and dry the area. Leaks to look out for include:
   • Burst pipes
   • Leaking pipes
   • Roof leaks
   • Basement and foundation leaks
5. Clean up after a flood right away. Floods can often lead to mold because there's a lot of water that comes in at once, and it’s not always possible to clean it all right away. After a flood, the steps you should take as soon as possible to clean include:
   • Removing all the excess water
   • Using a wet vacuum to get rid of dampness
   • Replacing damaged carpeting, flooring, and drywall
   • Using mold-inhibiting cleaners

Warnings

• Seek the help of a medical professional and call and expert to remove the mold if you suspect your mold might be causing health issues.

Sources and Citations

See also

• Know if You Need a Dehumidifier
• Identify Black Mold
• Remove Mold from Wood Furniture
• Clean Black Mold
• Remove Mold from Caulk
• Kill Mold With Vinegar
• Remove Mold and Mildew
• Remove Bathroom Mold
• Use a Dehumidifier
• Waterproof Your Basement

Read more ...

What links here

• Clean Black Mold
• Remove Ceiling Mold