Make Soda in a SodaStream Machine

Ever been fed up with the high prices in the cost of bottled sodas these days? Try using a SodaStream Machine. This article will help describe the process into using the machine effectively.

Steps

  1. Purchase the SodaStream machine, along with a few packs of SodaStream refills that contain the soda you'd like to create an identical of.
  2. Pour some cold water into a bottle or glass (depending on the size of your machine. Store it in a refrigerator for a few days, if the temperature of the water is a little more than room temperature.
  3. Screw the jug onto the machine, if the version you are using is that of a machine of taller filling size.
  4. Press the Carbonate button at the top of the machine, several times, until the carbonation amount is just right. You'll hear the bottle or cup begin to fill with carbonation. The ratio is one buzz per amount of fizz acceptably needed to suit your taste on carbonation.
    • Give it a break in between each push.
  5. Push the black "button" at the top of the device (the black button where you pushed the item into), backwards pushing from the top edge of the device. Push it just a little harder then gentle, but be firm.
  6. Take off/unscrew the bottle from the device. This will help create the fizziness of the drink water.
  7. Tip the bottle sideways a little, as to not lay it 90 degrees from it's current angle. Estimating a degree angle of 15 degrees should be enough to accurately pour it.
  8. Add one packet of the syrup into the jug, as directed on the package.
  9. Push the cap onto the bottle.
  10. Shake the bottle to mix the soda filling with the water.



Warnings

  • Never hold down the Carbonate button continuously. Give it a break in between each push.

Related Articles

You may like