Make a Model of DNA Using Common Materials
Making a model of DNA is a great way to learn about how this magnificent structure builds our genes. Using common household materials, you can make your own model combining science and crafts for a great project.
Contents
Steps
Making a Model Using Beads and Pipe Cleaners
- Gather your supplies. You will need at least four 12-inch pipe cleaners, and assorted beads in at least six colors.
- Plastic pony beads work best for this project, although you can use any kind of beads that have a hole wide enough to fit over the pipe cleaners.
- Each of the two pairs of pipe cleaners should be a different, color, giving you four total pipe cleaners preferably black and orange, they could be the phosphate and deoxyribose
- Cut the pipe cleaners. Take two pipe cleaners of the same color, and cut them into strips that are 3” wide. You will use these to string your C--G and T--A pairs of beads on. Leave the other two pipe cleaners at their full length.
- Bead the pipe cleaners for the double helix. Use two different colors of beads to represent the sugar and phosphate groups, and bead them in alternating colors down each of the pipe cleaners.
- Be sure that the two long strands that form the double helix match up, so that the beads are in the same order.
- Leave about a half inch of space between each bead to allow room to attach the other pieces of pipe cleaner.
- Bead your nitrogenous bases. Take the other four colors of beads, and pair them together. The same two colors must always go together, to represent the pairs of cytosine and guanine, and thymine and adenine.
- Place one bead from each pair at the ends of the 2” sections of pipe cleaners. Leave a little room at the ends to wrap around the double helix strands.
- It doesn’t matter what order the beads are placed on the pipe cleaners, as long as they are in the correct pairs.
- Attach your beaded pipe cleaners together. Take the now beaded 2” sections of pipe cleaner and wrap the ends around the long double helix strands.
- Space each small piece so they are always attached above a bead on the side of the same color. You should be skipping every-other bead on the double helix strands.
- The order of small pieces does not matter, it is up to you what way you would like to organize them on the double helix strands.
- Twist the double helix. Once all of the small sections of beads have been attached, twist the ends of the double helix in a counter-clockwise direction to give the appearance of a true strand of DNA. Enjoy, your model is complete!
Making a Model Using Styrofoam Balls
- Gather your supplies. For this version of the project, you will need small styrofoam balls, a needle and thread, paint, and toothpicks.
- Paint your styrofoam balls. Choose six different colors to represent the sugar and phosphate groups, and the four nitrogenous bases. They can be any six colors of your choice.
- You will need to paint 16 sugar balls, 14 phosphate balls, and 4 different colors for each of the nitrogenous bases (cytosine, guanine, thymine, and adenine).
- You could choose to have one of the colors be white, so that you don’t have to paint some of the styrofoam. This might be easiest for the sugar balls, as it will greatly reduce your total amount of work.
- Pair off the nitrogenous bases. Once the paint has dried, designate one color for each of the nitrogenous bases, and then pair them with their matching base. Cytosine always goes with guanine, and thymine always goes with adenine.
- The order of the colors does not matter, as long as they are in the correct pairs.
- Stick a toothpick between each of the pairs, leaving a little extra space at the sharp ends of the toothpicks.
- Make the double helix. Using the needle and string, cut a piece that is long enough to go the length of 15 styrofoam balls. Tie a knot at one end of the string, and thread the needle on the other.
- Line up the styrofoam sugar and phosphate balls, so that they alternate in sets of 15. There should be more sugar balls than phosphate balls.
- Make sure that the two strands of sugar and phosphate are in the same order, so that they line up when placed next to each other.
- Thread through the centers of each alternating string of styrofoam sugar and phosphate balls. Tie the string off at the end of each strand, to prevent the balls from sliding off.
- Attach the nitrogenous bases to the double helix strands. Take the toothpicks with your pairs of nitrogenous bases, and stick the sharp end to the matching sugar balls on each long strand.
- Only attach the pairs to the styrofoam balls representing sugar, as this is how DNA is attached in real life.
- Make sure that enough of the toothpick is attached to the strands that the pairs of bases will not fall off easily.
- Twist the double helix. Once all the pairs of toothpick bases have been attached to the sugar, twist the double strands in a counter-clockwise direction to mimic the appearance of a true double helix. Your model is now complete!
Making a Model Using Candy
- Select your candy. To make the sugar and phosphate sides, use strands of black and red licorice that have a hollow center. For the nitrogenous bases, use four different colored gummy bear candies.
- Whatever candy you use, make sure that it is soft enough to allow a toothpick to puncture it.
- If you have them on hand, colored marshmallows are a great substitute for gummy bears.
- Prepare your other supplies. Gather string and toothpicks to be used in creating the model. The string should be cut to be about a foot long, although you can make it longer or shorter based on your preferred size of DNA model.
- Use two pieces of string that are the same length to make the double helix.
- Make sure you have at least a dozen toothpicks, although you may need a few more or less depending on how large you make your model
- Cut the licorice. These will be strung on your string in alternating colors, and should be cut to be one inch long.
- Pair off your gummy bears. In a DNA strand, pairs of cytosine and guanine (C and G) are paired together, while pairs of thymine and adenine (T and A) are paired together. Choose four different colored gummy bears to represent these nitrogenous bases.
- It doesn’t matter if a pair goes C--G or G--C, as long as those are always the two in a pair.
- You cannot mix colors between pairs. For example, you cannot combine T--G or A--C.
- The colors you choose are completely arbitrary and are entirely based on personal preference.
- String your licorice. Take the two pieces of string and tie a knot in the bottom of each to prevent the licorice from slipping off. Then, thread the string through the hollow centers of the licorice in alternating colors.
- The two colors of licorice symbolize the sugar and phosphate that make up the double helix strands.
- Choose one color to be the sugar group; your gummy bear nitrogenous bases will be attaching to this color of licorice.
- Make sure that your two strands have licorice in the same order, so that they line up when placed next to each other.
- Tie another knot to the other end of the string once you have finished adding all your licorice pieces.
- Attach your gummy bears with toothpicks. Once you have paired off all your gummy bears in the C--G and T--A groups, use a toothpick and stick one bear from each pair at the ends of the toothpicks.
- Push the gummy bears far enough on each toothpick that at least ¼ of an inch of the sharp end is still sticking out.
- You can have more of some pairs than others; the number of pairs in real life DNA determines differences and changes in the genes they form.
- Attach your gummy bears to the licorice. Lay out your two licorice strands flat on a smooth surface, and then attach the gummy bear toothpicks to the licorice by inserting the sharp ends into the licorice.
- You should be attaching the toothpicks only to the “sugar” molecules that you decided on. These are all the pieces of licorice in the same color (for example, all the red pieces).
- Use all your gummy bear toothpicks, don’t worry about saving any.
- Twist your double helix. Once you have attached all your gummy bear toothpicks to the licorice, twist the strands in a counter-clockwise direction to give the spiral appearance of a true double helix. Enjoy your completed DNA model!
Related Articles
- Make an Edible DNA Model
- Make a Model Cell
- Build 3D Models of Animal and Plant Cells
- Build a Model Bridge out of Skewers
- Collect DNA
- Understand DNA Structure
