Pour a Drink Into a Glass

Pouring beverages out of bottles into glasses may be something for which you require guidelines. For this tutorial, we will be using orange juice.

Steps

Locate and acquire a cup (preferably glass, but not necessary) that the orange juice will be poured into.
Bring the beverage container to the glass or cup.
Firmly grasp the container, and then carefully unscrew the cap. Be cautious when doing this. A spill could result if too much force is put into unscrewing the cap.
With one hand pick up the container and began to tilt it towards the glass. With the other hand, hold the glass in place so that the force of the beverage does not knock it over.
Finally, complete the tilt of the container so that beverage flows out of the container and into the glass. The angle of the tilt will depend on how full the container is, but a full container will likely require between a 35° and 45° angle tilt.
Continue holding the diagonal container in place until the beverage level of the glass or cup fills to the desired amount.
When the desired amount of beverage is poured, rotate the container back to a standing position and set it down.
Put the cap back on the container, and return it to the refrigerator.
Enjoy your beverage.

Refrigerate the beverages before pouring if the packaging advises it or if that is your preference.
If the container is not full, you will have to tilt it even more for the orange juice to begin to flow. This could range from a 35° to 180° tilt.
Use a clean glass or cup, and rinse out any liquids that may have previously been in the glass.
If you have recently applied lip balm to your lips, then it is quite possible that you will leave "lip prints" on the glass after you take a sip.