Recognize Asbestos

Before the dangers of asbestos were common knowledge, it was widely used as a building material in residential and commercial buildings. Even though the health risks of asbestos fibers are now known, many structures built with the material still stand. Asbestos is made of microscopic fibers that cannot be seen by the naked eye. In order to identify it, you need to know what materials investigate, look for any manufacturer labels, and consult experts when in doubt.

Steps

Identifying Possible Asbestos Materials

  1. Date the material. The date of the building or material can tell you a lot about asbestos risk. Buildings made between the 1940s and the 1980s are very likely to have used asbestos materials. Even still, asbestos was phased out in the 1980s, so some buildings built during that time could have still used asbestos materials. If the building was built after 1995, it almost certainly utilized no asbestos materials.[1]
  2. Look at joints. On the outside of buildings, asbestos sheets were often joined together with aluminum runners. These runners were held on by small nails with no point at the end. On the inside, asbestos sheets were held together with plastic or wooden runners in the same way. This design could be a sign that the structure was built using asbestos materials. You should also inspect any adhesives used to join two materials together, as they often contain asbestos.[1]
  3. Analyze surface patterns. Asbestos materials often have a pattern on the surface that looks like small dimples or shallow craters covering the surface. Later materials have a smoother texture. While this is not a foolproof identification, seeing a dimpled pattern on the surface warrants taking asbestos precautions.[1]
  4. Inspect exterior building materials. Asbestos was used to make several exterior materials. Roofing and siding shingles are among the most common materials to contain asbestos, and will readily release fibers into the air if broken. Asbestos was also put into cement used on the exterior of buildings to help insulate the.[2]
  5. Investigate interior panels. Floors, walls, and ceilings were often made with asbestos containing materials. Vinyl tiles and decorative wall plasters commonly contain asbestos.[2]
  6. Check appliances and finishing materials. Aside from common construction materials, asbestos was used in a number of other manufactured pieces. These materials can be found in any system in your home or building. Some examples include:[3]
    • Insulation
    • Duct Work
    • Flues
    • Cowels
    • Fireproof Materials (doors, cabinets, etc.)
    • Eaves
    • Carpet Underlay
  7. Assess the location. Asbestos is a very strong, durable material. It is not susceptible to water the way that many materials are. For that reason, asbestos materials were often used in places like bathrooms and basements to avoid dealing with water damages.[1]

Looking for Identification Markers

  1. Identify the mold. Asbestos was molded into many different shapes and sizes to fill different needs. For example, sheets of asbestos were used to make up walls, and slats of asbestos were created to serve as roof tiles. Each mold has a different location that may be stamped with manufacturer’s information. This information sometimes discloses whether or not the material contains asbestos.[4]
  2. Scan for letter codes. Once you’ve identified the mold, look for any information that the manufacturer stamped or printed. If you find it, look for codes such as AC (contains asbestos) or NT (does not contain asbestos). Note that not all pieces will have this information.[4]
  3. Find additional codes. Some manufacturers used different codes at different times. If you can find any codes or markings on the material, try to look it up. Sometimes you can find the meaning of the code and determine asbestos content. Other times, information about the code is not made available.[4]

Getting an Expert Analysis

  1. Consult someone experienced in identifying asbestos. If you are in question, assume that the material is asbestos. If you need to be sure, bring in a consultant that is uniquely qualified to identify asbestos. This could be an experienced contractor or someone like a building inspector. These contacts can be found on the internet.[5]
  2. Collect a sample. If you do not want to bring in a contractor, or if they are unsure as well, a lab test is the most definitive process. Lab tests can tell you with certainty whether a material contains asbestos or not. Chip off a small corner of the material in question and place it in a bag.[5]
  3. Send the sample to a verified lab. Take your sample to a NATA certified lab. If there is one in your area, you can drive it there. If you have to send it off in the mail, follow any regulatory guidelines for mailing asbestos. The lab will identify the material and report back to you.[5]

Warnings

  • Assume any material in question contains asbestos and use appropriate precautions.[5]

Sources and Citations

  1. ↑ 1.0 1.1 1.2 1.3 http://www.asbestosremovalguide.com/446/how-to-identify-asbestos-fibro-cladding/
  2. ↑ 2.0 2.1 http://www.maplevalleyfire.org/documents/RandAAsbestos.pdf
  3. ↑ http://www.asbestostesting.com.au/asbestos-pictures/
  4. ↑ 4.0 4.1 4.2 http://www.aic.org.uk/identifying-asbestos/
  5. ↑ 5.0 5.1 5.2 5.3 http://www.asbestos.vic.gov.au/in-the-workplace/commercial-property-owners/find-and-identify
Retrieved from "https://kipkis.com/index.php?title=Recognize_Asbestos&oldid=265538"