Use the Palm 'Touchstone' Wireless Charger
The HP/Palm Touchstone is a cool "hockey-puck-like" dock for your webOS device. (Pre, Pixi, Veer) Not only does it hold your device, but it can also charge it magically.
Contents
Steps
- Equip the device with a Touchstone back cover. It is a soft-touch matte back cover. The side facing in has 2 gold contacts, 4 circular magnets, and the large circular induction coil in the middle.(Unless you have the original (Sprint) Palm Pre, your device should already be equipped.)
- Plug in the Touchstone. (USB cable plugs into the back of the dock, silver circles facing each other, other end of the USB cable connects to a 5V wall adapter.)
- Place device on the dock, make sure the magnets align properly/it's seated properly.
- Enjoy! Show it off!
Tips
- Charging behavior may "spasm," make sure the device is seated accurately.
- The device can be placed in any orientation and it will charge.
- webOS features an "Exhibition Mode" which is a sort of a screensaver displayed when charging on the Touchstone. Various information can be displayed.
- The HTC EVO can be modded to charge on this dock.
- Some people mount a Touchstone in their car.
- The HP Pre 3 phone won't stay on the Touchstone as well as it should. Physical modification to better accommodate the different back curve is possible.
- Pressing the power button when charging goes straight to Exhibition Mode. Pressing again turns off the screen. An up-swipe exits Exhibition mode.
- If the device has an incoming call, just removing the device from the TS will answer the call, placing it back down will switch to speakerphone.
Warnings
- Do not place metal between the device and the dock. Fire/Damage may occur.
- Android phones do not have Exhibition Mode.
- The Touchstone will not function if plugged into a computer USB port.
- The device will heat up while charging.
- These instructions were based on the original phone model. The Touchstone for the HP Touchpad is different.
- We are not responsible if your country explodes as a result of following these instructions.
Things You'll Need
- The Touchstone dock
- The USB cable that came with the device (others may not fit)
- A wall-outlet -> USB plug. (A non-Palm adapter may be used)
- a Touchstone-compatible back cover (for devices with removable battery doors. It comes stock in all webOS devices except the original Palm Pre.)