Apply Nail Polish Neatly

Applying neat, even layers of nail polish is extremely tricky. Getting a clean and crisp nail polish line takes practice, patience, and a steady hand. If you happen to paint outside the lines, you can always clean up your mistakes!

Steps

Preparing Your Nails for Polish

1. Remove old polish from your nails. In order to produce a neat and even manicure, you must first remove any old polish from your nails. Acetone nail polish removers dry out your nail, and cuticle. If possible, use a non-acetone nail polish remover over an acetone nail polish remover.
   • Place a cotton swab or ball over the opening of your nail polish remover. Make sure it is completely covering the opening of the bottle.
   • Tip the bottle upside down and wait a few seconds for the cotton swab or ball to become saturated with the remover.
   • Rub the saturated cotton swab or ball over your nails to remove the polish.
   • Re-saturate your cotton swab or ball as needed.
2. Trim, file, and smooth your nails. After removing your old nail polish, devote some time to clipping, shaping, and buffing your nails. Locate nail clippers, emery board, and a gentle buffer.
   • Use the clippers to trim your nails, if needed.
   • Smooth the edges of your nails with an emery board nail file. File your nails into a round, square, or rounded-square shape.
   • Run over each nail with a slightly abrasive buffer to even out the surface of your nails.
3. Soak your hands in warm water. Once your nails are clipped, shaped, and buffed, take a moment to relax and pamper yourself. Retrieve a basin and fill it with warm water and a squirt of your gentle facial cleanser. Use a gentle body scrub to exfoliate your hands before soaking them. Submerge your hands in the warm, soapy water to remove the body scrub. Soak your hands for three minutes. Remove your hands from the basin and dry them on a clean towel.
   • After soaking your hands, your cuticles will be soft and easier to push back.
4. Push back your cuticles. Cuticles are a part of your skin. They protect your nail matrix, the portion of the nail that grows, from infection. Cutting your cuticles leaves your nail matrix open to infections. It can also cause deformities in the nail, such as ridges and discoloration. Instead of cutting your cuticles, push them back to give your nail an oval appearance. It also makes it easier to create a neat polish line.
   • Use a cuticle pusher to carefully push the cuticle back towards your nail bed.
   • Push in the sides of the cuticle as well.
   • Remove any dry or damaged skin.
   • Repeat on the rest of your nails.
5. Moisturize your cuticles and skin. After exfoliating your hands, it is important to rehydrate and moisturize your soft skin. Select a thick and luxurious hand cream or lotion. Massage this cream or lotion into your hands.
6. Remove oil and grease from your nails. If left on your nails, the oils from your hand cream or lotion will shorten the life of your polish. You can remove these oils from your fingernails with rubbing alcohol and a cotton swab or ball.
   • Place a cotton swab or ball over the opening of the rubbing alcohol bottle.
   • Tip the bottle upside down and wait a moment for the cotton swab or ball to become saturated with the rubbing alcohol. Place the bottom of the bottle on a flat surface.
   • Swipe the rubbing alcohol saturated cotton swab or ball over your nails to remove the oil.
   • Repeat as needed.

Using Different Tricks to Keep Your Nail Polish Neat

1. Apply a thin layer of petroleum jelly around each nail before painting your nails. Before painting your nails, you can take measures to prevent the polish from drying outside the lines of your nails. You can achieve a perfectly neat mani every time by placing a thin layer of petroleum jelly around the edge of your nail. The oil from the vaseline will serve as a barrier between your skin and the nail polish.
   • Dab a cotton bud into a jar of petroleum jelly. If you don’t have vaseline, you can use lotion.
   • Swipe the cotton bud around the edges of each nail—keep the cotton bud and petroleum jelly on your skin. Do not let either touch your nail.
   • Pick out your polish and get ready to paint your nails.
2. Apply a thin coat of white school glue around each nail prior to polishing your nails. If you struggle to paint inside the lines of your nails, you can take steps to ensure a swift and neat clean-up. Apply a thin coat of white school glue around the edge of your nails to create a neat, crisp polish line. The glue will protect your skin from the polish.
   • Dip a cotton bud or brush into a bottle of white school glue.
   • Use the cotton bud or brush to paint a thin, even layer of white school glue around the edge of each of your nails. Do your best to keep the glue off your nails.
   • Wait for the glue to dry before you polish your nails.
3. Wait to clean up your nail polish line. As you continue to improve at painting your nails, you may have less errant nail polish to remove from your skin. Instead of applying a thin coat of petroleum jelly or white school glue, you may choose to clean up your nail polish lines after you’ve finished applying your polish and top coat. You can perfect your polish line with an old makeup brush and nail polish remover. This method requires a steady, practiced hand and patience.
   • You may also use a clean cotton-bud dipped in nail polish remover.

Painting and Drying Your Nails

1. Apply a base coat to each nail and wait for it to dry. Base coats strengthen and protect your nails. This first layer of your manicure also extends the life of your polish. Coat each nail in a thin, even layer of base coat. Allow the base coat to dry.
   • Swipe the brush on the inside of the bottle’s opening to remove excess base coat from the brush.
   • While you should always use a base coat, it is especially important to use this product if your nails frequently chip, split, or peel. The base coat will help to fortify your nails.
2. Apply the first thin coat of polish in three strokes and allow it to dry. In order to achieve a nice, neat, and even manicure, apply one to three thin layers of polish. You can control the thickness of each coat by only leaving enough polish on your brush to cover one nail. Remove excess polish from your brush by sliding your brush up the inside of the bottle’s opening from base to tip. Once you have just enough polish on your brush, apply the paint in three strokes
   • Place a small dab of polish at the base of your nail above your cuticle. (This prevents the polish from pooling.)
   • Use the brush to pull the dab of polish down towards the cuticle—do your best to leave a small gap of nail between the polish and your cuticle.
   • Swipe the brush in a straight line from the base to the tip of your nail.
   • Return the brush to the base of your nail. Move the brush upwards along the left curve of your nail until the entire side is coated in polish.
   • Return the brush to the base of your nail. Move the brush upwards along the right curve of your nail until the entire side is coated in polish.
   • Repeat this process on each nail.
   • Allow the polish to dry before adding another coat.
3. Apply a second and/or third thin coat of polish in three strokes and let it dry. As your first coat dries, determine if you need to add a second layer of polish. If your polish is sheer, you may want to add two or more coats; if your polish is opaque, you may not need to add a second and/or third coat. Once your first coat of polish is dry, apply a second coat of polish if desired.
   • Put a small dot of nail polish at the base of your nail just above your cuticle.
   • Pull the dot of polish down towards the cuticle with the brush—try to leave a small gap of nail between the polish and your cuticle.
   • Pull the brush in a straight line from the base to the tip of your nail.
   • Place the brush at the base of your nail. Swipe the brush along the left curve of your nail until the entire side is coated in polish.
   • Place the brush at the base of your nail. Pull the brush upwards along the right curve of your nail until the entire side is coated in polish.
   • Repeat this process on each nail.
   • Allow the polish to dry before adding a third coat or applying a top coat.
4. Apply an even layer of top coat to each nail and wait for it to dry. Top coat adds a brilliant shine to your polished fingers. Once your nails are completely dry, apply a thin layer of top coat to each nail. If possible, apply a quick-drying top coat to your nails.
   • Soak your fingernails in ice water to help your polish cure faster.

Cleaning Up Your Polished Nails

1. Use a cotton-bud to remove the petroleum jelly from around each nail. If you applied a thin coat of petroleum jelly around the edge of your nails, allow your nails to dry completely before you remove the substance. Once the top coat is dry, trace the edges of your nails with a clean cotton-bud. As you remove the petroleum jelly from your skin, you will also wipe away any polish sitting on top of the oily substance.
2. Peel off the thin coat of glue and excess nail polish from around each nail. When your nails are dry, carefully remove the thin layer of dried white school glue from your skin. As you peel away the dried glue, you will also remove any polish that is outside of your nail polish line. Once removed, you will be left with a neat and crisp nail polish line.
3. Clean up excess polish with an old makeup brush and nail polish remover. After painting your nails, you can carefully remove any excess polish with an old makeup brush dipped in nail polish remover. In addition to a brush a remover, you will also need a cotton swab or ball. When you’re done touching up your nail polish lines, you’ll be left with a pristine manicure.
   • Pour out a small amount of nail polish remover into a dish or the bottle’s cap.
   • Dip your brush into the remover and then blot it on a clean cotton swab or ball.
   • Position the brush next to your untidy nail polish line.
   • Without applying any pressure, sweep the brush along your nail polish line. Repeat on each nail polish line.
   • Use the brush to remove nail polish that dried on your skin.
   • Dip your brush in the remover and wipe your it off on the cotton swab or ball as needed.

Tips

• Before you apply nail polish to your nails, make sure you apply a base coat to prevent getting your nails stained from the nail polish.
• If you have flaked nails, try to go neatly and slowly over the flaked parts.
• If you can't do it right the first time, keep trying and you'll soon get better before you know it.
• If your nail polish is too thick, you can buy nail polish thinner. Do not attempt to thin your polish by adding nail polish remover.
• Take your time! Rushing may make the polish sloppy, and it will not look very nice.
• When applying nail polish, start in the middle of your nail and the move on to the other sides. You should only need three strokes. Always start from the cuticle and work towards the tip. Make sure the nail polish is dry before applying a top coat.
• You could also dip a Q-tip in nail polish remover and rub away specks on your skin.

Things You'll Need

• Nail clippers
• File
• Nail buffer
• Warm water
• Basin
• Gentle facial cleanser
• Body scrub
• Base coat
• Nail polish
• Top coat
• Cotton swabs, balls, and or buds
• Nail polish remover
• White school glue
• Vaseline

Related Articles

• Make Cute Flower Nail Designs
• Paint a Heart on Your Nail
• Apply Rebel Nail Film Coverings to Your Fingers
• Paint Polka Dot Nails with a Toothpick

Sources and Citations

See also

• Take off Nail Polish on Skin
• Paint Your Toe Nails
• Paint Your Nails
• Dry Nail Polish Quickly
• Use a Nail Stamper
• Remove Shellac Nail Polish
• Make Your Own Nail Polish Color
• Remove Nail Polish from Around the Nails
• Make Matte Nail Polish
• Paint Your Nails Without Making a Mess

Read more ...

What links here

• Make Newspaper Nails
• Activate Glow in the Dark Nail Polish
• Apply Magnetic Nail Polish
• Apply Nail Polish Properly
• Buy Nail Polish on a Budget
• Make Panda Nail Art
• Take off Nail Polish on Skin