Build a Slosh Pipe and Get a Killer Core

The slosh pipe is an absolute destroyer of weakness. You will build an incredible core using every muscle in your body at the same time. If you are looking for a time efficient and fun way to work out- for under $25, then you have found the right toy. Not intended for the weak of mind or body!

Steps

Slosh Pipe Assembly

  1. Gather necessary parts. You will need to go to Home Depot or your local hardware store for most of these parts.
  2. Assemble the slosh pipe. Put one end cap onto pipe- ensure a tight fit. Fill halfway with water (40 lbs +/- TOTAL WEIGHT should be the final weight of the slosh pipe).
  3. Put on other end cap- ensure a tight fit.
  4. Measure for center of pipe and mark with tape around pipe.
  5. Try to lift slosh pipe. Your goal is to maintain perfect stability Due to the nature of moving water this will NOT be an easy task

Slosh pipe exercises

  1. Hold slosh pipe steady across shoulders for crucifix style.
  2. Press slosh pipe into the air and hold over head.
  3. Do squats with slosh pipe.



Tips

  • The quickest way to build this is with the Quick Caps, they are rubber end caps that have screw adjustable plumbers tapes.
  • If you don't have any tape a Sharpie would also do the trick.
  • If you buy the glue on kind make sure you ALSO purchase PVC glue and primer, follow the directions as labeled.

Warnings

  • Be ESPECIALLY CAREFUL if you have any lower back or shoulder injuries!
  • Ensure proper lifting technique
  • Always consult a doctor prior to engaging in any strenuous activity
  • Make sure the area around you and overhead is clear of anything that could get into your way creating a safety hazard

Things You'll Need

  • 10' PVC pipe, 4" diameter
  • 4" End Caps- either Quick Caps or the hard plastic glue on kind
  • A piece of colored 2" wide tape to mark the middle
  • A source of water

Related Articles

You may like