Clean Burners on a Stove

Cleaning burners on your stove may seem like a daunting task, but there are simple ways to tackle even the dirtiest elements. For a basic cleaning, remove the coils or grates from your electric or gas stove top and wipe them down with soapy water. A baking soda paste can be used to remove stubborn stains, or you can use ammonia, if your burners are full of grease and grime. Glass stove top burners can be cleaned with baking soda and a vinegar spray, or with magic eraser pads.

Steps

Doing a Basic Cleaning

1. Remove the burners. Before cleaning, remove the burners from your gas or electric stove top. Be sure that the stove is off and that the elements are completely cooled down before taking off the burner grates or coils. Place them aside on a counter top to be cleaned.
   • Most burners come off easily, but others may require a gentle twist or squeeze to be removed. If you encounter difficulty, refer to your appliance manual for detailed instructions.
2. Wipe down the burner coils or grates. Add a few drops of dish washing liquid to a small bowl of warm water and agitate the mixture to produce soap suds. Dip a clean cloth or rag into the liquid, wring it out, and wipe down each coil to remove stains or debris. Re-wet and wring out the cloth for each burner.
   • With electric burner coils, avoid getting the electrical connection wet and do not submerge them in water.
3. Rinse and dry the burners. Wet a clean cloth with plain water and wipe down the burner coils or grates once again. Be sure to remove any soapy residue that may be left behind. Lay the burners on a clean dish towel to dry.
   • For best results, let the burners dry for several hours before putting them back on the stove.

Using Baking Soda on Tough Stains

1. Make a baking soda paste. If any stubborn stains remain after wiping down the burner coils or grates, use a baking soda scrub to gently remove them. In a small bowl, add 1-2 tablespoons of baking soda. Slowly add drops of water and stir until the mixture reaches a thick paste consistency.
2. Apply the paste. Using a soft cloth, sponge, or old, soft-bristled toothbrush, gently apply the baking soda paste to the stains on your burners. For best results, only apply the baking soda paste to burner coils or grates when they are removed from the stove top. Let them sit for 15-20 minutes.
3. Wipe off and dry the burners. Using a clean, wet cloth, wipe the baking soda paste off of the burners. Wipe as thoroughly as possible to make sure that none of the mixture is left behind on the burners. Let the coils or grates dry completely before reattaching them to the stove.

Using Ammonia

1. Bag the burners and add ammonia. Remove the burner coils or grates from your stove top and place them in separate, gallon-size Ziploc bags. Add ¼ cup (2 oz.) of plain ammonia to each Ziploc bag. Be sure to keep the ammonia away from anything containing bleach, as the combination of the two chemicals can cause toxic fumes.
   • The ammonia does not have to cover or coat the burners. The fumes from the ammonia within the bags will slowly dissolve build up and grime on your burners.
2. Seal and store the bags. Seal each Ziploc bag tightly. Move the bags outdoors, or to a room where the ammonia smell will not affect you, and place them on a surface that will not be damaged if the ammonia leaks (e.g. a concrete floor). Let the bags sit overnight, or for approximately 12 hours.
3. Wipe the burners clean. Put on protective rubber gloves before touching the ammonia-soaked burners. Remove the coils or grates from the Ziploc bags. Wipe down thoroughly with a clean, wet cloth or sponge and allow them to air dry.

Cleaning Glass Stove Top Burners

1. Sprinkle baking soda over the surface. Wait until the surface of your glass stove top is entirely cool before cleaning. Sprinkle baking soda over each burner circle (or the entire surface of the stove top, if desired). Be sure to add a thick layer of baking soda to cover all of the area you wish to clean.
2. Spray the surface with vinegar. Fill a spray bottle with white vinegar. Spray the surface of the stove with the vinegar. Make sure that all of the baking soda is covered with vinegar and let the ingredients sit for 15 minutes.
3. Wipe down the surface. Using a clean, wet cloth, wipe down the entire surface of the stove. Re-wet and wring out the cloth as needed to fully remove the baking soda and vinegar. Let the surface air dry before using the stove.
4. Remove stubborn stains. For stubborn food stains or scorch marks, use a magic eraser pad for cleaning. Wet the pad and gently wipe stains. To make cleaning easy, remove stains as soon as they occur to prevent them from caking onto the surface of the stove.

Sources and Citations

See also

• Sanitize Kitchen Surfaces
• Clean Greasy Kitchen Cabinets
• Clean Le Creuset
• Clean Your Kitchen Floor
• Clean Quartz Countertops
• Clean a Coffee Grinder
• Clean Moldy Grout
• Organize a Kitchen
• Remove Coffee Stains from a Stainless Steel Pot
• Take Care of Granite Countertops

Read more ...