Connect TiVo to a WiFi Network

Your TiVo must be connected to their servers in order to update with the latest program information, and to update the software that runs your TiVo unit. While the most common way to connect is with a phone line, you can also connect your TiVo to your wireless network. This provides greater bandwidth than the phone line, and obviates the need for that pesky phone cord.

Steps

  1. Ensure your TiVo is compatible with wireless access. Note that only Series 2 TiVo units are compatible. Note that any unit that is a DirecTivo (i.e. a unit that acts as your DirecTV control box) will not connect over the wireless network without heavy modification, because DirecTV has disabled the USB ports. Some companies will remove this block for you, but the service can be somewhat pricey.
  2. Visit the TiVo website for a list of compatible USB WiFi adapters. While probably just about any one will work, there are a few on the market that are not compatible. You will save yourself grief by getting one that is known to be compatible.
  3. Plug the USB WiFi unit into the USB port on the back of your TiVo.
  4. Using your Tivo remote, go to Messages & Setup, then Settings, then Phone & Network Setup. Select Edit Phone or Network Settings, then select Wireless Settings, then select continue to next step.
  5. You will see a list of available networks. Hopefully, your home network is listed -- select it. If it is not listed, either you have set it up not to broadcast its SSID, your TiVo is out of range, or your network has a problem.
  6. If you have security turned on for your home network, you will now be instructed to enter a password/WEP key. Do so.
  7. Select Yes, Connect Via the network to instruct your Tivo to dial-up over the internet rather than the phone line.
  8. Disconnect your pesky phone line!

Tips

  • You must have software version 4.0 or greater to connect to WiFi. To find your software version, go to Messages & Setup, then highlight System Information. If your version number is below 4.0, you will have to upgrade your software first. Note that DirecTivos will not run version 4.0 of software, and possibly not on pre-Series 2 Tivos.
  • You can now also use your Tivo to view photos or video from computers connected to the same network, or to listen to music MP3 files stored on your PC.
  • To update the software to run the USB Wifi unit, you still need an analog line.

Related Articles

Retrieved from "https://kipkis.com/index.php?title=Connect_TiVo_to_a_WiFi_Network&oldid=291769"