Decorate With Streamers

Crepe-paper streamers are inexpensive party decorations that give big visual impact. With nothing but a roll of streamers, scissors, and tape, you can turn almost any get-together into a festive gathering. Decorating with streamers is all about expressing your own creativity in strips of crepe paper.

Steps

Creating a Crepe Paper Canopy

  1. Fold the end of a roll of crepe paper over the hula hoop. The end of the crepe paper should rest back on the streamer.
    • The hula hoop will serve as the center of your canopy. All of the streamers will be attached to the hula hoop.
  2. Staple the end of the streamer to itself. If you don't have a stapler, you may use tape.
  3. Unroll the crepe paper to the desired length and cut. Each streamer needs to span from the center of the room to an outside wall. In order to achieve a dramatic drape, the streamer must be a few feet longer than this distance. Just to be safe, you may want to overestimate how long the streamer needs to be. This will allow you to adjust the drape of the streamer. You can always trim it later.
    • While you can measure this distance, you may find it easier to cut one streamer as a reference. With a friends help, unroll the crepe paper from the center of the room to an exterior wall. Adjust the drape of the streamer and then cut. Use this streamer as a guide.
  4. Repeat. Continue to add streamers to your hula hoop until it is completely covered. The streamers may overlap slightly. You can create a pattern with the streamers or attach the different colored crepe paper randomly.[1]
  5. Suspend the hula hoop from the center of the ceiling. The attachment method you use depends entirely on the ceiling. The most convenient installation method involves tying the hula hoop to a light fixture or a beam. If these options aren’t available to you, get creative. You can also Hang-a-Hook-from-a-Ceiling to suspend the hula hoop from.
    • When you hang the hula hoop, make sure the staples used to attach the streamers are facing up.
    • Use fishing paper so your guests don’t see the string.[1]
  6. Attach the streamers to outer walls or ceiling. Pull one streamer at a time to the edge of the room. Adjust the drape of the streamer and then secure it to the outer wall or ceiling with a piece of scotch tape. Repeat until each streamer is draped across the ceiling. When it is done, the ceiling will be hidden by streamers.[1]

Making a Back-drop Out of Streamers

  1. Determine the dimensions of your back-drop. Before you assemble the back-drop, measure its length and width. Mark the dimensions of the back-drop with a light pencil mark, chalk, or a piece of tape.[2]
    • The back-drop may be as large or as small as you’d like—it will really depend on the space you’re using and how you intend to capture the back-drop on camera. Ask yourself the following questions: Do you want to take full-body shots or will the pictures be from the waist up? How tall are your guests? How many guests do you want in one picture?
  2. Attach a piece of masking tape—sticky side out—to the wall. Stretch a piece of masking tape—sticky side out—along the top edge of your back-drop from corner to corner. To secure the tape to the wall, cover each end with a piece of masking tape.
    • The streamers will hang from the sticky side of the tape.[2]
  3. Stick streamers onto the tape. Attach streamers to the masking tape from left to right. Roll out each streamer to the desired length and cut it in a straight line. As you move from one corner of the back-drop to the other, layer the streamers slightly and vary the colors.
    • Don’t worry about cutting every streamer to the same length. You will trim them later.[2]
  4. Cover the top edge with a piece of crepe paper. Place pieces of rolled masking tape along the top edge of the back-drop. Roll a single streamer along the top edge of the back-drop in a straight line. Cover the two small vertical pieces of tape on each end in the same manner.
    • This will give the top of your back-drop a clean, crisp edge.[2]
  5. Tape the bottom of the streamers to the wall. Stretch a piece of masking tape—sticky side in—across the bottom edge of your back-drop. Attach each end of the tape directly to the wall. This piece of tape will prevent your streamers from moving.[2]
    • If you want the streamers to move with the breeze, don’t tape the streamers to the wall. This will provide you with a less structured, and perhaps more whimsical backdrop.
  6. Trim the streamers just below the edge of the tape. With a pair of scissors, carefully trim each streamer near the bottom edge of the tape. You will cover the bottom with a streamer, so don’t worry about trimming each streamer perfectly.[2]
  7. Cover the bottom edge with a piece of crepe paper. Stick several pieces of rolled masking tape along the bottom edge of your back-drop. Roll a single streamer along the taped edge in a straight line. When the backdrop is done, you will have a solid rectangle or square of crepe paper to pose in front of.[2]
    • You can add two small vertical streamers to each corner so that it matches the top.

Hanging, Draping, or Wrapping Streamers

  1. Hang streamers throughout the venue. You can hang streamers from just about any surface—all you need is some scotch tape. Hang a row of streamers across the top of a doorway or window. Alternatively, you may hang streamers along the front of a table or the back of a chair.
  2. Drape streamers around the room. Tape one end of the streamer to a surface, like a table or a wall. Loosely run the streamer across the surface. As you go, periodically tape the streamer to the surface itself to create a “U” shaped drape.
  3. Wrap streamers around a banister or railing. Tape the streamer to one end of the banister or railing. Wrap the streamer tightly around the banister or railing until the entire length is covered. Cut the streamer from the roll and tape the end in place.[3]

Layering Streamers

  1. Double-up your streamers. Instead of hanging just one streamer, you can add color to the space by hanging two streamers at the same time. Select two different colored streamers.
  2. Layer the streamers. Set the one streamer on top of the other so their ends meet and tape the ends together. Roll out each streamer to the desired length and cut.
  3. Secure the ends together. Staple each end of the layered streamers. If you don't have a stapler, you can tape the two streamers together.
  4. Hang the streamers. Attach one end of the layered streamers to a surface. As you walk to the other attachment point, rotate the streamers so they twist. Attach the other end to a surface.
    • In order to see both colors, you must twist the streamers.[4]

Fringing Streamers

  1. Fold the streamer over itself to create multiple 12 inch (30.48 cm) layers. This will allow you to fringe the entire length of the streamer very quickly and efficiently. Once you reach the desired length, cut the folded streamer from the roll.
  2. Fringe your streamers. With a pair of scissors, make multiple cuts up and down the two long edges of the folded streamer. To avoid severing the streamer, stop the scissors just shy of the center every time When you're finished, the streamer will have a festive, thin fringe running up and down both edges.
    • A standard streamer is 1.75 inches (4.45 cm) wide. Your fringe should be approximately 1/2 inch (1/27 cm) long.
  3. Unfold the streamer. As you unfold the streamer, you will see two continuous edges of fringe. Be careful not to rip the delicate crepe paper.
  4. Hang the fringed streamer. Attach one end of the streamer to the surface of your choice with a piece of scotch tape. Walk the streamer to the other end point, twisting the crepe paper as you go. Attach the other end of the streamer to a second surface. The fringed streamers will add flair to any party.[5]

Tips

  • Select a streamer color or colors that match the occasion. For example, if you're decorating to watch a sports game or celebrate a win, choose your team's colors; use red, white and blue streamers to decorate for the Fourth of July; orange and black for Halloween; red, green, silver and white for Christmas; and neutral tones for Thanksgiving.

Things You’ll Need

Creating a Crepe Paper Canopy

  • Hula Hoop
  • Streamers
  • Scissors
  • Tape
  • Stapler

Making a Back-drop Out of Streamers

  • Multiple rolls of crepe paper in different colors
  • Masking tape
  • Tape measurer
  • Scissors

Hanging, Draping, or Wrapping Streamers

  • Crepe Paper
  • Tape
  • Scissors

Layering Streamers

  • 2 rolls of crepe paper
  • Tape
  • Scissors

Fringing Streamers

  • Crepe Paper
  • Tape
  • Scissors

Related Articles

Sources and Citations

  1. ↑ 1.0 1.1 1.2 http://www.athomewithnatalie.com/diy-streamer-canopy-tutorial-confirmation-party-details/#gs.sKo=IHs
  2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 http://lovelyindeed.com/photobooth-backdrop-streamers/
  3. ↑ https://www.birthdayinabox.com/pages/children-s-party-basics
  4. ↑ https://www.youtube.com/watch?v=a2T6RVCHy7I
  5. ↑ https://www.youtube.com/watch?v=gT0odug3ACM

You may like

Retrieved from "https://kipkis.com/index.php?title=Decorate_With_Streamers&oldid=263720"