Make Flavored Lip Gloss
Do you spend a lot of money buying lip gloss? Instead of buying commercial lip gloss, you can make your own. Whether you like gloss flavored like fruit, chocolate, flowers, or peppermint, you can follow a few simple recipes to make lip gloss of your own.
Contents
Ingredients
Fruity Kool-aid Lip Gloss
- 1 cup petroleum jelly
- 1 package dry Kool-aid mix, flavor of your choice
Mint Chocolate Lip Gloss
- 1 teaspoon coconut oil
- 1 teaspoon pure almond oil
- 1 teaspoon cocoa butter
- 3-4 drops pure vitamin E oil
- 1-2 drops pure peppermint extract
- 3-4 semi-sweet chocolate chips
Rose Lip Gloss
- 1/8 cup coconut oil
- 1/4 cup beeswax
- 1/8 cup shea butter
- 1 teaspoon coconut or vanilla extract
- 1/4 cup rose petals, fresh or dry
- 1 teaspoon sweet almond oil
Peppermint Lip Gloss
- 8 drops peppermint oil
- 2 tablespoons almond oil
- 1 tablespoon beeswax pellets
Steps
Making Fruity Kool-aid Lip Gloss
- Melt the petroleum jelly. Put the petroleum jelly in a microwave safe bowl. Cook for 30 seconds. Pull out the jelly and stir, checking the consistency. Keep cooking in 30 second bursts until it becomes a liquid.
- Be careful as you pull the bowl out of the microwave. It will be very hot.
- You can also melt the jelly on the stove in a double boiler. Place the jelly in a heat safe bowl over a pan of boiling water. Make sure the bowl is not touching the water. Stir until the jelly liquefies.
- Stir in the Kool-aid. When the jelly is finally liquid, let it cool for a little bit. It needs to be close to room temperature. Pour the Kool-aid into the jelly. Stir until the crystals dissolve.
- You can use any flavor or color of Kool-aid that you want. It just depends on what you like.
- If you don't like Kool-aid or would like a more natural fruity alternative, mix in 1-2 teaspoons of fruit juice instead.
- Don't wait too long. The jelly may re-solidify. If this happens, heat the jelly again.
- Finish the gloss. Pour your mixture into small lip gloss containers. Set the containers aside to cool. They should solidify in about two hours. Once the two hours pass, check the consistency. If they are still too runny, allow them to set for another hour.
- This number of containers of lip gloss will vary depending on the size of the containers you use. Look for the kind of container you want in your local craft store.
Making Mint Chocolate Lip Gloss
- Boil water. Put about an inch of water in a saucepan. Cook it on the stove over medium-high heat. Heat the water until it is steaming.
- Melt the ingredients. Place all your ingredients in a heat safe bowl. Place the bowl over the steaming water, making sure that the bottom of the bowl doesn't touch the water. Use a small spoon or spatula to stir the ingredients. Keep stirring until the ingredients are melted and fully combined. This should take about 5 minutes.
- You will know the ingredients are all melted when the mixture is smooth.
- Put it in a container. Pour the ingredients into a small, sterilized lip gloss container. Allow the mixture to cool to room temperature. This should take about 1 hour.
- You may want to place it in the fridge to help it cool faster.
- Use your lip gloss. Apply with a small brush or your fingertip. Store your lip gloss in your purse. Be aware that the gloss will melt in high temperatures. If this happens, put the container in the fridge to solidify it again.
- This recipe makes one container. It will stay good for up to two months.
Making Rose Lip Gloss
- Melt ingredients. Place all your ingredients into a small saucepan. Heat on low until all the ingredients are melted and mixed together.
- You can also use other fragrant flower petals or herbs if you don't like roses.
- You can also microwave the ingredients in a glass bowl at 30 second intervals until they are melted and smooth.
- Strain the gloss. Pour mixture through a small strainer into a second bowl underneath. This will separate the rose petals from your lip gloss.
- You can leave them in if you want. They create a nice visual effect.
- Finish the gloss. Pour your mixture into sterilized lip gloss containers. Let the mixture cool for 2-3 hours or until solid. Replace the top and enjoy.
- This recipe makes 6 small containers.
- The beeswax makes this gloss hard enough to put into tube containers. You can find these at your local craft store.
Making Peppermint Lip Gloss
- Melt the oil and wax. Place the almond oil and beeswax into a glass jar. Put the lid on the jar. Place the jar in a saucepan of water on medium-high heat. Leave the jar in the water until the wax is melted.
- Make sure you keep enough water in the pot to cover where the mixture is in the jar.
- Add flavoring. Remove the jar from the pot and open the lid. Stir the ingredients until combined. Add the peppermint oil to the mixture in the jar.
- Do not add too much peppermint oil. It can burn your lips if you put too much. Start with 8 drops the first time you make it. You can add more when you make it again if it wasn't enough for you.
- You can stir in a little bit of lipstick to the mixture if you want to add a tint to your lip gloss.
- Cool the gloss. Pour the mixture into a sanitized container. Leave open for 2-3 hours or until hard.
- A fun idea is to use an old metal mint container as your lip gloss container. The box will already have a minty smell and the metal container is the perfect size for the amount of gloss the recipe makes.
Tips
- If you want, you can print out or buy stickers to decorate your lip gloss containers.
- Makes these as gifts or party favors. They are thoughtful, fun, and useful gifts.
Related Articles
- Make Lip Gloss with Petroleum Jelly
- Make Your Own Lip Gloss Without Beeswax
- Make Lip Gloss
- Make a Fabulous Creme Blush
- Make Citrus Lip Gloss
