Measure the pH of Water

It is important to test the pH--the level of acidity or alkalinity--of water. Water is consumed by the plants and animals we depend on, and we directly consume it ever day. The pH level of water can provide information on potential contamination. Consequently, testing the pH of water can be an important public health precaution.

Steps

Using a pH Meter

  1. Calibrate the probe and meter following the manufacturer specifications. You may need to calibrate the meter by testing it in a substance with a known pH rating. You can then adjust the meter accordingly. If you will be testing water away from a lab, you may want to perform this calibration several hours before you take the meter to the field.[1]
    • Rinse the probe with clean water before using it. Dry it off with a clean tissue.
  2. Collect a sample of the water in a clean container.
    • The water sample must be deep enough to cover the tip of the electrode.
    • Let the sample sit for a moment so the temperature can stabilize
    • Measure the temperature of the sample using a thermometer.
  3. Adjust the meter to match the sample temperature. The probe's sensitivity is affected by the temperature of the water, and so the reading of the meter cannot be accurate if you do not input the temperature data.[2]
  4. Put the probe into the sample. Wait for the meter to come to equilibrium. The meter has reached equilibrium when the measurement becomes steady.
  5. Read the pH measurement of the sample. Your pH meter should provide a reading on the scale of 0-14. If the water is pure it should read close to 7. Record your findings.

Using Litmus Papers

  1. Get to know the difference between pH paper and litmus paper. To obtain an accurate reading of a solution, you can use pH paper. This is not to be confused with the common litmus paper. Both can be used to test for acids and bases, but they differ in important ways.[3]
    • pH strips contain a series of indicator bars that will all change color after exposure to a solution. The strength of the acids and bases on each bar differs. After they change, the color pattern of the bars can be matched to the examples that come with the kit.
    • Litmus paper are strips of paper that contain an acid or a base (alkaline). The most common of these are red (which contains an acid that reacts with bases) and blue (which contains a base that reacts with acids). The red strips turn blue if the substance is alkaline, and the blue strips turn red if they contact an acid. Litmus papers can be used to provide a quick and easy test, but the cheapest of them do not always provide accurate readings on the strength of the solution.
  2. Collect a sample of the water in a clean container. The water sample must be deep enough to cover the test strip.
  3. Dip a test strip into your sample. Just a few seconds of exposure will suffice. The different indicator bars on the paper will begin changing color within a few moments.
  4. Compare the end of the test strip with the color chart that came with the paper. The color(s) on the chart should match the color(s) of your test strip. The chart should correlate color patterns to pH levels.

Understanding pH

  1. Learn about how acids and bases are defined. Acidity and alkalinity (the term used to describe bases) are both defined by the hydrogen ions they lose or accept. An acid is a substance that loses (or, some say, donates) hydrogen ions. A base is a substance that accepts additional hydrogen ions.
  2. Understand the pH scale. The pH number is used to rate the level of acidity or alkalinity of water soluble substances. Water normally contains an equal amount of hydroxide ions (OH-) and hydronium ions (H30+). When an acidic or alkaline substance is added to water, they change the proportion of hydroxide and hydronium ions.[4]
    • It is typically said to be on a scale of 0 to 14 (though substances can actually be fall beyond that range). Neutral substances rate close to 7, acidic ones below 7, and alkaline substances are above 7.
    • The pH scale is a logarithmic scale, meaning that differences of a single integer actually represent a tenfold difference in acidity or alkalinity. For instance, a substance that has a pH of 2 is actually ten times more acidic than one with a pH of 3 and 100 times more acidic than a substance with a pH of 4. The scale functions similarly for alkaline substances, with one integer representing a tenfold difference in alkalinity.
  3. Get to know why we test the pH of water. Pure water should have a pH of 7, though common tap water has a pH between 6 and 5.5. Highly acidic water (water with a low pH) is more likely to dissolve toxic chemicals. These can contaminate the water and make it unsafe for human consumption.[5]
    • It is often considered best to test pH on site. If you collect a water sample for study in a lab, carbon dioxide in the air can dissolve into the water. The dissolved carbon dioxide reacts with the ions in the water to increase acidity in basic or neutral solutions. To prevent carbon dioxide contamination, you must test water within 2 hours of collection.[6]

Related Articles

Sources and Citations

  1. ↑ http://chemed.chem.purdue.edu/genchem/lab/equipment/phmeter/use.html
  2. ↑ https://www.labdepotinc.com/articles/pH-temperature-compensation.html
  3. ↑ http://classroom.synonym.com/differences-between-litmus-paper-ph-strips-13673.html
  4. ↑ http://chemwiki.ucdavis.edu/Physical_Chemistry/Acids_and_Bases/Aqueous_Solutions/The_pH_Scale
  5. ↑ http://www.lenntech.com/carbon-dioxide.htm
  6. ↑ http://water.epa.gov/type/rsl/monitoring/vms54.cfm

You may like

Retrieved from "https://kipkis.com/index.php?title=Measure_the_pH_of_Water&oldid=313429"