Paint Metal Knobs
One of the simplest ways to update the look of cabinetry or furniture is to refinish the hardware. Small pieces of hardware like metal drawer pulls can be painted quickly for a fresh, updated look. Painting drawer pulls and knobs also allows you to customize the finish by choosing the color yourself. Follow the steps below to learn how to paint metal knobs properly.
Steps
- Remove the metal knobs from the drawers. To do this, you will usually only need a Phillips-head screwdriver. Loosen the screw holding each knob in place and set both the screws and knobs aside.
- Wash the metal knobs. It helps to wash the knobs before sanding and painting them; this keeps small particles of dust and debris from mixing in with the paint and marring the finish. You can wash the knobs with water and any mild soap. Wipe the knobs completely dry with a clean cloth before sanding them.
- Sand the knobs. Once the knobs are dry, go over each of them lightly with medium-grit sandpaper. This will prepare the surface for priming, and will also help to remove any loose or flaked paint from the knob. Wipe the knobs with a tack cloth after sanding to remove any particles of paint or metal left by the sanding.
- Prepare the knobs for priming and painting. You will not be able to handle the knobs while applying the primer or paint, because this will create fingerprints in the finish. The simplest way to set the knobs up for painting is to lay them out on a sheet of plastic with their tops facing up. However, a more elegant solution can be prepared using a sheet of cardboard.
- Obtain a large sheet of sturdy corrugated cardboard; you can easily cut one out from a shipping box. Fold the sheet down the middle so that it holds a 45 degree angle. Place the folded cardboard on top of a flat surface so that it forms a "tent" shape. Poke the screw of each knob through the underside of the cardboard and secure the knobs just as you would when installing them in your drawers.
- You can now prime and paint the knobs in place on the cardboard support. The cardboard will keep the knobs from rolling and touching each other, and the angle will keep paint from pooling around the knobs. Make sure to lay down newspaper or another disposable material underneath the cardboard tent.
- Prime the metal knobs. You should purchase and apply a clean metal primer to improve the paint's adhesion. Clean metal primer is available in spray cans and can be purchased from nearly any hardware store. To apply it, shake the can as indicated in the directions, and spray the entire cardboard support in long, smooth passes. A thin layer is all that is needed, and will dry faster than a thick layer. Allow the primer to dry as per the can's directions; the primer should no longer be tacky to the touch before applying paint.
- Apply paint to the metal knobs. For painting metal knobs or other hardware, you should use a metal spray paint, which is designed to adhere well to metal. For a glossy and durable finish, use a spray paint that is designated as "enamel." This paint should be applied just as you applied the primer. Shake the can and spray the knobs in long, smooth passes. Keep the spray can moving at all times to avoid creating thick patches that may lead to drips. One coat of paint will usually be sufficient.
- Reinstall the metal knobs. After allowing the paint to completely dry, unscrew the knobs from the cardboard support and screw them back into your drawers.
Tips
- Make sure to clear the spray can nozzle after use by holding the can upside down and spraying for a few seconds.
- You will achieve the best results when using spray paint at a temperature between 50 and 90 degrees Fahrenheit (10 - 32 degrees Celsius).
- When applying primer or paint, make sure to work in a well-ventilated area. If working outdoors, take precautions to minimize the risk of errant hairs or other debris blowing into the wet paint on the knobs.
Things You'll Need
- Metal knobs
- Phillips-head screwdriver
- Soap
- Water
- Sponge
- Clean cloth
- Medium-grit sandpaper
- Tack cloth
- Cardboard
- Scissors
- Newspaper
- Clean metal primer
- Metal spray paint
