Remove Shellac

Shellac is a resin that the female lac bug secrets. When processed, it is turned into dry flakes which are dissolved in industrial alcohol to make liquid shellac. Liquid shellac is used as a food glaze, a wood finish and a brush-on colorant. It is a high quality varnish for wood, and is prized for being a natural tough primer and sealant. This article explains how to remove shellac that has been used primarily as a wood finish or sealant.

Note that the Shellac Nails product is something different, and the company that manufactures this product asks that you seek professional removal for it, from a qualified salon. If you need further information about removing nails, see How to remove gel nails and How to remove acrylic nails.

Steps

Checking the wood finish is shellac

1. Try to find out how old the wood piece or furniture is. Shellac was a common wood finish before the 1920s; this may be enough to indicate to you that you have a shellac finish. Shellac is also the principal way to make French polish and has been used for this purpose on quality furniture over the past century.
2. Test for a shellac finish. Old or new, here is the way to check the finish on the furniture or woodwork:
   • Dab a little denatured alcohol on one section of the wood finish. Try to find an inconspicuous spot.
   • If it is shellac finish, it will liquefy and dissolve.
   • A result of softening without dissolving suggests there is shellac present but that it has been mixed with lacquer as well.
   • Any other response and you're probably looking at a different wood finish. If in doubt, talk to someone familiar with furniture restoration.

Deciding whether the shellac really needs removing

1. Always work to avoid jobs rather than create them when restoring furniture and woodwork! Where the shellac finish appears stained or has dirt embedded in it, try the following first:
   • Sprinkle a mild abrasive compound over the surface. For example, pumice or rotten-stone.
   • Work this in.
   • Rub off with a cloth.
2. Buff with a clean rag. If the surface looks good again, you're spared having to remove the shellac.

Applying denatured alcohol to the shellac

For deeper stained, or irregular and missing shellac stain, removing it is probably your best option. Here is how to remove it:

1. Use denatured alcohol to remove shellac. Also find a piece of 4/0 steel wool.
2. Using a small brush, brush the shellac with the denatured alcohol.
3. Allow the denatured alcohol to sit for a few minutes. This will help it to begin naturally stripping off the shellac.

Removing the shellac

1. Put on some rubber gloves to protect your hands.
2. Rub the shellac with the steel wool. Remove as much as you can with the steel wool.
   • This part does require some effort and hard rubbing. You may need to take breaks and come back to it, depending on the size of the job. Getting others to help is always a good solution!
3. For curved, grooved or harder areas, use a carpet knife. This will be able to reach into narrow spots where the steel wool is just not able to reach.
4. Remove the remaining shellac by wiping with a rag. Change the rag frequently, to avoid reapplying the shellac on stripped parts of the surface.
5. Remove all soft pieces and any debris before proceeding with adding a new finish. It's also important to sand the surface before applying a new finish.

Tips

• Shellac comes in various colors––button polish is golden brown and is made from the highest grade shellac; standard French polish has orange undertones from the orange shellac flakes; bleached shellac results in pale colored woods retaining their paleness and transparent shellac polish comes from removing the natural wax found in bleached shellac.
• There are also commercial preparations available for removing shellac. Decide whether you want to spend the added cost by getting advice from the retailer or manufacturer.

Warnings

• Despite being natural, some shellac surfaces may be hard to remove. It can be a combination of age, method of application and what other layers have been added. If you are struggling too much, seek professional advice.
• You may need to reapply the denatured alcohol frequently, as it will dry fast and more will be needed.
• If you reapply a shellac finish, be aware that it is very easy to scratch and that it is susceptible to damage from both water and alcohol. You will also need to be quite skilled in its application and polishing.

Related Articles

• Apply Shellac

Sources and Citations

• TLC, http://tlc.howstuffworks.com/home/how-to-strip-wooden-furniture.htm – research source
• Time-Life Books, Restoring Antiques, p. 111, (1995), ISBN 0-8094-9929-0 – research source

See also

• Lime Finish Oak
• Remove a Dent from Wood
• Apply a Ceruse Finish
• Ombre Paint a Dresser
• Paint a Fabric Chair
• Cure Bamboo
• Paint Laminate Furniture
• Age Wood With Vinegar and Steel Wool
• Wax Furniture
• Paint Wooden Furniture

Read more ...

What links here

• Apply Shellac
• Refinish a Dresser