Shave With an Electric Shaver
Getting a quick, close shave, while not bleeding to death, has been one of the banes of mankind. While the electric shaver has seriously reduced blood loss and cut down on shaving time, it still can be troublesome when trying to achieve the perfect shave. Proper preparation, technique and aftercare are keys to optimizing your electric shaver.
Contents
Steps
Preparing to Shave
- Choose the shaver that best fits your needs. Read men’s forums or consult a grooming specialist, like a barber who specializes in facial shaves, to understand how your facial hair grows and the correct technique to approach the contours of your face. Everyone’s hair grows at a different rate and has a different texture so be aware of what features benefit you most.
- While electric shavers are mostly used for dry shaving, new models can also be used for wet shaving as well. However, new wet models may be pricey.
- Consumer sites can help you determine which shavers suits your price point. Some shavers may be overpriced based on added features that you do not need for your specific hair type.
- Wash your face. Warm water, a hot shower, or a warm face cloth will help soften your beard and thus make it easier to get a clean shave.
- Wash your face with a gentle facial cleanser to get rid of any dirt that has built up. If you have sensitive skin, consult a skin care specialist to find out what cleanser is best for you.
- Wet a washcloth with hot water if you don’t have time to shower. Hold it to your beard/stubble for a few minutes.
- Allow your face to adjust. It usually takes about 2 weeks to adjust to an electric shaver but during this time, the oils from your shaver will blend with those of your face.
- Use an alcohol based pre-shave. Alcohol based products will remove dirt and your skin’s natural oil (sebum) from your skin and make your facial hair stand straight up. A powder version can be used if you find alcohol to be an irritant.
- Most pre-shave products include ingredients like vitamin E to ensure that your skin is protected and irritation is reduced.
- There are some products like pre-shave optimizer and pre shave oil that can improve the effectiveness of an electric shaver. Consult a skin care specialist to find out what best works for your skin. Stick to your skincare routine once you’ve found what works for you.
- Find the grain of your facial hair. Rub the places where your facial hair grows and the direction that feels smooth is the direction that’s "with the grain." This other direction will give resistance when you rub it. This is "against the grain."
- It does not matter whether your facial hair is straight, curly or coarse, learning the direction it grows allows you to avoid irritation and in-grown hairs.
Choosing between a Rotary Shaver vs a Foil Shaver
- Identify what factors are most important to your shave. Whether you want to save time, avoid mess, or get a close shave without irritating your skin, there are basically two types of electric shaver to use: rotary and foil. Rotary shavers utilize a revolving motion that guarantees a closer shave. This is a very popular choice because it doesn’t pull hair and provides a comfortable shave.
- The three rotating mechanisms of a rotary shaver can help with hard to reach areas. Flexibility can depend on the brand so do your research to accommodate the contours of your face.
- Titanium blades that form part of the rotary mechanism aid in painless shaving.
- A foil shaver has oscillating blades behind steel foils that lifts the hair out of the face as opposed to cutting it. These electric shavers have 3 to 4 blades and more blades means a reduced shaving time but can also be more noisy . The large head allows you to cover more area so this choice may be right for you if you want a quick and efficient shave.
- Replace your blades periodically. Foil shavers need the foil replaced every 1 -2 years depending on the toughness of your stubble. If you end up pressing harder to get a decent shave, chances are that you forgot to change the foil. Rotary blades needs to be replaced once a year.
- Skin irritation is another sign that you need to change the foil.
- Don’t throw away the manual as details of how to replace parts and valuable manufacturer contact information will become invaluable the longer your keep your shaver.
- Shave with proper technique. Understand that each shaver utilizes a different method to remove hair so optimize your shave by moving in a supplementary direction.
- When using a rotary shaver, make small circular motions with the shaver head on your face but remember not to press hard or go over the same spot repeatedly to avoid irritation.
- Foil shavers work best when you shave with back-and-forth strokes.
- Keep your shaver clean. Debris can easily build up, especially if you have thick facial hair so be sure to regularly clean your shaver. Do not bang your shavers or use tools that aren't specific to cleaning shavers.
- Foil shavers by Braun, Panasonic or Remington can be cleaned by lifting the head frame off and gently brushing out the whiskers from the under side with the cleaning brush supplied by the manufacturer. Do not touch the screen because it is very fragile.
- Philips rotary head shavers can be cleaned by lifting off the razor head assembly and brushing out the under side of the three cutters and the razor chamber. Don’t tap the heads on the sink as it may dent or damage the precision-made combs.
- Remove each cutter and comb the retaining plate of your rotary shaver every other month, or more if you have thick or fast growing hair, by brushing the whiskers from the cutters and soaking them in liquid cleaner and lubricate.
Shaving with an Electric Shaver
- Ensure your blade is sharp. It is recommended that you replace these at least once a year, or you will fail to get a good shave, and may end up irritating your skin.
- Hold the shaver in your dominant hand. For example, if you use your right hand to write, also use it to shave. Use your off hand to hold your skin tight as you go over your skin with the shaver. Make sure to shave against the grain if you want a closer shave but careful to take your time for best results.
- Hold the shaver at right angles to your face as your other hand pulls the skin taught to ensure hairs stand upright. This will also create maximum skin contact which reduces shaving time and minimizes snagging.
- Use your non-dominant hand to pull your skin tight. This will help you get the closest shave possible.
- Shave your cheeks and the side of your face. Shave with the grain, usually from the top towards your jaw.
- Shaving against the grain gives a closer shave but is an easy way to cut yourself and you run the risk of cutting hair below the skin level, which creates ingrown hairs. These are also known as razor bumps because the whisker grows into the surrounding tissue instead of out of the pore, which causes inflammation and possible infection.
- Shave your sideburns. Make sure to look at the mirror at a level angle to ensure both sides are even.
- Put down the shaver and use both index fingers to help give you some perspective of which side is longer by placing each finger at the bottom of each side burn. For example, place your left finger at the bottom of your left side burn pointing towards your reflection in the mirror. Do the same with your right finger at the same time to get a sense of which side burn is longer and adjust accordingly.
- Shave your mustache area below your nose. Use your index finger of your non-dominant hand to lift up your nose and force your upper lip downward to provide more surface area for you to shave.
- You can also try moving your upper lip away from the direction that you are shaving. For example, shave downward and to the left as you move your upper lip toward the right. This will help flatten out your skin and expose your shaver to more of your hair.
- Shave underneath your lip and chin. Bite and suck in your lower lip to maximize the surface area that the shaver touches. Go slowly around your lip to make sure you don't cut yourself.
- You can also try moving your jaw away from the direction of your shaving stroke. For example, shave downward and to the left as you move your jaw to the right. This will flatten out your skin and expose your shaver to more of your hair.
- Shave your neck and beneath your jaw. This area is the most sensitive and the trickiest so take your time. Tilt your head up and move closer to the mirror to get the best visual angle.
- Many men with sensitive skin should shave the most tender areas, like the neck area below the jawbone, first, and then move to tougher spots like between the ears, nose and mouth because some shavers generate heat that can cause irritation.
- Check your mirror for missed spots. Electric shavers may leave small patches in hard to reach areas so it's best to take a look in the mirror before putting away your shaver.
- Wash away and wipe off any loose hair and use your finger tips to feel if there are any loose strands remaining.
Maintaining Your Skin and Shaver After You Shave
- Apply lotion to your newly shaved face. This is especially important if you use alcohol based pre-shave, as the alcohol dries your face out.
- Consult a skin care specialist to find out what after shave works best for your skin type.
- Aftershaves, eau de toilets, and colognes are used for different purposes. Aftershave helps to give you a fresh scent after shaving while moisturizing and medicating your skin. Be aware of your surroundings in case coworkers or others in close proximity are sensitive to the strong smell that these products may provide.
- Clean your razor. In many models you can lift off the head of the razor. You should then brush the whiskers out of the cutter and cleaning brush.
- Lubricate the metal pieces of your cutter and screen. A small amount of lubricant should be sprayed on the screen while the razor is running. Do not wipe it off when you're done.
- Consult the user's manual for what lubricant works best for your model. Do not use a lubricant meant for other tools as it may contain harsh chemicals not meant to touch your skin.
- Consult a skin care specialist immediately if a rash or irritation happens after applying a new lubricant. Chances are you’re having either an allergic reaction to the lubricant or a combination of the lubricant and other skin care products.
Tips
- Shave daily. Electric razors are much more effective (and less painful) when cutting short stubby facial hair and have a tendency to yank or brush past long hairs.
- Read the manual that comes with the razor. It will contain the hints for getting the closest of shaves.
- The cutting blades and screens of a rotary shaver are in matched, honed sets. Do not mix them up.
- Once monthly (or at least every six weeks) give the shaver a complete and thorough cleansing. Run it under water and really get the heads and the blades clean. Brush out each blade separately. Use the manufacturer's cleaning solution or an electric shaver cleaner to remove accumulated grease or debris from the cutting blades.
- Aftershave does not close your pores. That is a myth. Our pores do not have muscles, so they cannot close. If irritated they may swell a bit.
- Electric shavers are great for light growth and regrowth but are almost impossible to use if trying to get rid of long, thick facial hair.
- Cordless models are ideal for travel.
- Electric shavers make less of a mess than the tools that require a lot of product like globs of shaving cream and there is no need to buy additional cartridges.
Warnings
- If you have long hair on your head, keep the shaver away from stray hairs. The shaver will pull them out (very painful) and sometimes clog your razor.
- An electric razor should not cut you. If you bleed while shaving you are using too much pressure or the device is broken.
- On foil-type shavers, watch for holes in the foil - as they can cause a quick and painful injury. Check the foil before every shave. Although rotary types can wear through as well, it is far less common.
- Do not shave when driving. Don't fall victim to the convenience of electric shavers. Distracted driving can not only cause you unwanted nicks and cuts but can also lead to a fatal accident.
- You may get small patches of hair in hard-to-reach areas.
- Electric shavers often dries out the skin, which encourages rashes.
Things You'll Need
- An electric razor (foil or rotary top)
- An electric razor brush.
- An effective after shave (optional)
- Pre-electric shave (optional)
- A good face wash or face scrub (optional)
