Assemble a Unicycle

You have bought a unicycle and have no clear idea of how to assemble it, Learn how to assemble your Unicycle in this article.

Steps

Attach the pedals to the cranks. The pedals should have a (L) for the left pedal and a (R) for the right.
Make sure they are attached to the correct crank.
Be careful not to cross the thread.
Attach the frame to the wheel. The frame of the unicycle must also be put on facing the correct direction, at the top of the frame where the seat post goes there is a small slit and a clip with two holes where the seat post clamp attaches, this is the back of the frame.
Pretend you're riding it, when building the unicycle so your left and right sides don't get mixed up.
Make sure the frame is facing forward and the left pedal is on the left hand side.
Attach the frame using the allen key bolts or the nuts and bolts provided.
Attach the seat to the unicycle frame.
Place the seat post into the unicycle frame.
Insert the seat post clamp.
Face the thinner end of the seat to the front.
Tighten the seat post clamp bolt then push the leaver down to tighten even more.
Check that the left crank is on the left hand side.
Check the frame is facing forward.
Check the thinner part of the seat is at the front.

If the frame, wheel and seat aren't all facing the correct direction, the pedals can become loose and grind out the cranks. Try doing it again then.