Clean a Koi Pond

A koi pond can be a beautiful, calming addition to your garden or your backyard. You may have a larger koi pond with many different koi or a smaller pond with only a few koi. Cleaning a koi pond may seem like a big project, but with a few supplies and steps, you can ensure your koi thrive in their pond.

Steps

Gathering Your Supplies

  1. Put the spray attachment on your garden hose. Make sure you have access to a garden hose that runs properly with fresh, lukewarm water. You should put the spray attachment on the hose so it is easy to use when you rinse and wash out the koi pond.[1]
  2. Look for a skimmer net. Skimmer nets can be found at your local pet store or online. Look for a skimmer net that has a square end, as it will make it easier to push the net off the sides of the pond to pick up any debris. You can also use the skimmer net on a regular basis to maintain your koi pond and make sure the water stays clean.[2]
  3. Get a holding container large enough for the koi. If you decide to remove your koi from the pond before you clean it, you will need a container that is large enough for the koi to hang out in while you do the pond cleaning. The container should be wide enough for your fish and deep enough for at least one foot of pond water.[1]
  4. Look for dechlorinator at your local pet store. Dechlorinator will be used to remove the chlorine from the replacement tap water in the pond once it is clean. It is important that you dechlorinate the water before you put the koi back in the pond so the water is healthy for them.[2]
  5. Invest in a pond vacuum. The vacuum will make it easier to remove leaves and sludge from the bottom of the pond. Pond vacuums can be found at your local pet store or online. If you do not have access to a pond vacuum, you can also use a shop vacuum, though it may not work as well.[2]
    • Keep in mind a complete clean of the pond could interfere with algae growth in the pond. But if your koi pond is really dirty from the winter or from poor maintenance, you may want to use a vacuum for a more thorough clean.

Preparing the Pond for Cleaning

  1. Clean the pond in the spring. The best time to clean your koi pond is at the beginning of spring, when the pond has started to thaw from the winter. Try to plan for an annual pond clean at the beginning of spring when the weather starts to warm up, your koi become more active, and the water is not yet full of bacteria and algae.[3]
    • You can do a fall cleaning if you are not able to clean the pond during the spring. In the fall, your pond may become full of fallen leaves and debris as the trees change, so you may think about doing a clean. However, you should try to maintain the koi pond during the spring, summer, and fall so the once a year clean is easier to do.[4]
  2. Scoop out debris on the surface of the pond. Get the pond ready for draining and washing by using the skimmer net to remove any debris on the pond’s surface. Try to scoop out all the leaves, branches, and twigs floating on the surface. This will make draining and cleaning the pond easier.[1]
  3. Drain the pond. You can use the pond pump to drain the water. Make sure you send the water into an area of your yard that has good drainage. Pumping out the water will make it easier to clean the sludge and debris at the bottom of the tank.[1]
    • As you pump out the water, make sure you leave about one foot of water at the bottom of the pond so your fish can swim around. You can then leave your koi in the pond as you wash the pond and clean out any debris. You may decide to leave the koi in the pond if your pond is large and you do not want to deal with taking out all the koi.
    • If you decide to remove your koi from the pond, you should pump out about one foot of water into the holding container meant for your fish. This way, you can transfer the fish into the container in water that they are used to swimming in to avoid shocking them.
  4. Remove the koi if your pond is small. If you have a small koi pond and you want to give it a complete clean, you can remove your koi from the pond. This is a messy task, so you should wear old clothing and be prepared to get your hands dirty.[1]
    • Use the skimmer net to scoop the koi out and place them gently in the holding container of pond water. Once you have all the koi in the container, you should cover the container with netting or a breathable lid so the koi do not jump out.[2]
    • Place the container in a shaded area in your yard, away from sunlight. This will ensure the koi stay healthy and happy while you clean the pond.
  5. Take out the pond pump and any water accessories. You should give the pond pump a rinse with the pond water and run the filter through the pond water until it is clean if the pump is not self cleaning. Do not use tap water to clean the filter, as this can destroy the good bacteria in the filter.[5][2]
    • You should also take out all water accessories in the pond, like water plants or water features. You can then place the plants in a shaded area of your yard and cover them with newspaper to protect them. You should place underwater plants in a container of clean water.
    • If you have any water features in your pond that are made of non-natural materials, such as plastic items, you can use a toothbrush to scrub and clean them so they are ready to go back into the pond once it is clean.[1]
  6. Let the sun dry the empty pond for one hour. Once you have emptied out the pond, you can take a one hour break and let the sun dry out any newly exposed algae in the pond. This will make it easier for you to get rid of debris and algae once you actually wash out the pond.[1]

Washing the Pond and Refilling It

  1. Use the hose and the vacuum to clean the pond. Take out the water hose with the spray nozzle and blast away at the debris and sludge at the bottom of the pond. Make sure you keep the velvet type of algae lining the pond intact, as this is beneficial algae and should not be disturbed.[2]
    • Use the hose to wash any other attached features on the pond, such as a waterfall or rocks around the perimeter of the pond. Never use any chemicals to clean the pond, only water, as chemicals can introduce toxic substances into the pond environment.
    • You can then use the pond vacuum to remove any sludge at the bottom of the pond that is hard to get out with the hose. You may come across very smelly goo, decomposed plants, or even a dead frog or fish. Remove it all so the pond is free of any bad bacteria or debris.
  2. Put the pump and the accessories back in the pond. Once you have washed out the pond so it is free of debris and sludge, you should put the pond pump and the pond accessories back in the pond.[1]
    • If you have water plants, you may wait until you fill the pond with new water to place them back in the pond.
  3. Refill the pond with water. Use the garden hose to refill the pond. Usually, koi ponds are not very deep, around two to three feet deep.[3]
    • Once the pond is filled with new water, add the dechlorinator to the water to remove the chlorine in the water. Turn on the pond pump and allow the water to circulate in the pond for five to ten minutes.[2]
    • To avoid shocking your fish, you should dump some of the water from the holding container and replace it with the new pond water. Do this several times to allow your koi to get used to the new water. The fresh water will be colder than the water your fish are used to and exposing them to water can shock them.[1]
  4. Put the koi back in the pond. Once your koi have been given enough time to get used to the new pond water in the holding container, use the skimmer net to gently place the koi back in the clean pond.[1]
    • If you did not remove your koi from the pond, you can skip this step.

Things You'll Need

  • A skimmer net
  • A holding container
  • Dechlorinator
  • A garden hose with a spray nozzle
  • A pond vacuum

Related Articles

Sources and Citations