Handle Big Bales
Large round bales multiply the dangers of taking shortcuts. Often bales reach a weight of 1,500-2,000 lb. and can be hazardous. Operators without proper equipment and knowledge about big bales may find themselves in a situation in which the bale rolls backwards down raised loader arms, or causes the tractor to overturn. According to the Iowa Department of Public Health, four tractor operators in these situations were fatally crushed in a three-year period by large round bales.
Steps
- Make sure your tractor and loader are large enough to safely handle bales. The uneven weight distribution affects stability. Rollovers are common if equipment is not used correctly.
- Always use a grapple hook if you have a front-end loader. This keeps bales from rolling back onto the loader arms in the raised position.
- Try to keep the bale on the up-slope side of the tractor during transport. This may mean you need to put the transmission in reverse and back up a hill when using a rear-mounted spike, or that you back down a hill when using a front-end loader.
- Avoid driving across a slope with a large round bale. Never drive with the front-end loader in the upright position.
Warnings
- Never try to stop a rolling bale. They have the momentum of a subcompact car traveling at the same speed.
- Most operators try to bale hay quickly to avoid adverse weather and a consequent reduction in hay quality. Unfortunately, such haste can cause fatigue and the use of shortcuts that result in accidents.
