Make a Harry Potter Scarf

Ever wanted a Hogwarts scarf to accompany your cosplay? What about wanting to show off your Gryffindor, Hufflepuff, Ravenclaw, or Slytherin pride? You can always buy a Harry Potter scarf, but they can get pretty expensive and could be hard to find. Luckily, it is easy to make a Hogwarts scarf. Not only is it cheaper, but you get to choose the exact colours, design, and length that you want! Knitting is the most popular choice to make a scarf, but if you don't know how to knit, you can always try to crochet or sew a scarf instead.

Steps

Knitting a Simple Scarf

1. Choose your house colors. You will need equal amounts of both colors. Choose yarn that is the same weight and texture, and preferably the same brand. The house colors are as listed below:
   • Gryffindor: Red and Gold
   • Hufflepuff: Black and Yellow
   • Ravenclaw: Blue and Bronze (books) or Blue and Silver (films)
   • Slytherin: Green and Silver
2. Cast on 20 - 25 stitches with your first color. It does not matter which color you start with; they will even out in the end. This pattern will create a simple block-style scarf, with equal sized stripes.
3. Knit 20 rows. You can knit the stockinette stitch, which is alternating rows of purl and knit stitches. This will give you a knit texture on one side, and a bumpy (purl) texture on the other. You can also knit the garter stitch, which is knitting every stitch on every row. This will give you a bumpy (purl) texture on both sides.
4. Change colors to the second color. Cut your yarn down to about 6 inches (15.24 centimeters). Pull out your second color and have it ready to knit with. Leave behind a 4 to 6-inch (10.16 to 15.24-centimeter) tail.
5. Knit 20 rows using your second color. Once again, you can do a stockinette stitch or a garter stitch. Which ever you choose, make sure that it matches the one you used for your first color.
6. Continue alternating colors and knitting 20 rows. Keep doing this until the scarf is the length you want it to be. Most scarves are about 60 inches (152.4 centimeters) long.
7. Cast and bind off. Knit two stitches onto your right needle needle. Use your left needle to pull the first stitch over the second stitch and slip it of off your needle. Keep knitting a stitch, and using your knitting needle to pull the previous stitch off the needle, until you have one stitch left.
8. Tie the yarn off. Once you reach the end, cut your yarn down to 6 inches (15.24 centimeters). Thread it back through the last stitch, then back through the loop you made. Once you have a tight knot, use a yarn needle or a tapestry needle to weave the tail back into the scarf. Cut off any excess yarn.
9. Tie the tail ends and weave them in. Go back over your scarf where you had the color changes. Tie the tail ends together, then weave them back into the body of the scarf. You can do this with a yarn needle or a tapestry needle. Cut off any excess yarn.

Knitting a Fancy Scarf

1. Choose your house colors. This design uses a base color and an accent color. The first color listed is your main house color, and the second color is your accent house color.
   • Gryffindor: Red and Gold
   • Hufflepuff: Black and Yellow
   • Ravenclaw: Blue and Bronze (books) or Blue and Silver (films)
   • Slytherin: Green and Silver
2. Cast on 20 to 25 stitches with the main house color. This design will create alternating thick and thin stripes. Your first stripe will be a thick one, using your main house color. The main house colors are listed below as such:
   • Gryffindor: Red
   • Hufflepuff: yellow
   • Ravenclaw: Blue
   • Slytherin: Green
3. Knit 20 rows. You can use a stockinette stitch or a garter stitch. The stockinette stitch is alternating rows of knits and purls. It is knit on one side, and bumpy on the other. The garter stitch is knitting on each row. It will give you a bumpy texture on both sides.
4. Change colors to the accent house color. Once you reach the end of the row, cut your yarn down to 4 to 6 inches (10.16 to 15.24 centimeters). Set the yarn aside, and pick up your accent color. The accent colors are as listed below:
   • Gryffindor: Gold
   • Hufflepuff: Black
   • Ravenclaw: Bronze (books) or Silver (films)
   • Slytherin: Silver(films)
5. Knit two rows. Use the same stitch as you did for your main house color: stockinette or garter. Be sure to leave behind a 4 to 6-inch (10.16 to 15.24-centimeter) tail when you start knitting.
6. Change back to the main house color and knit for two rows. Once you reach the end of the second row, cut your accent color down to 4 to 6 inches (10.16 to 15.24 centimeters). Pick up your accent color.
7. Knit two more rows with your accent color. Once again, leave a 4 to 6-inch (10.16 to 15.24-centimeter) tail at the start of the first row and the end of the second one. This will create a distinctive double-stripe seen on the house scarves in the later films.
8. Continue knitting until you have the scarf as long as you want it. Most scarves are about 60 inches (152.4 centimeters) long. Repeat the pattern listed below:
   • 20 rows in your main color
   • 2 rows in your accent color
   • 2 rows in your main color
   • 2 rows in your accent color
9. Cast and bind off. Knit two stitches onto your right needle. Use your left needle to pull the first stitch over the second stitch. Slip that first stitch of off your right needle. Keep knitting a stitch, then using your knitting needle to pull the previous stitch off the needle. Stop when you have one stitch left.
10. Tie the yarn off. Once you reach the of the row and have one stitch left, cut your yarn down to 4 to 6 inches (10.16 to 15.24 centimeters). Thread it through the last stitch, then back through the loop. Make a tight knot, then use a yarn needle or a tapestry needle to weave the tail back into the scarf. Trim off any excess yarn.
11. Tie the tail ends and weave them in. Go back over your scarf where you had the color changes. Tie the tail ends together, then weave them back into the body of the scarf. You can do this with a yarn needle or a tapestry needle. Trim off any excess yarn.
12. Consider adding add tassels or a fringe. Wrap some yarn around your palm three times. Cut the excess yarn off, then snip the bottom of the loop. Use a crochet hook to pull the folded part of all three strands through the bottom corner of your scarf. Pull the tail end of the strands through the loop. Tug on the tail ends to tighten them. This makes one tassel.
    • You can match the tassels to the stripe you are weaving them into. You can also use the other color.
    • Consider alternating the tassels between your two house colors. Space the tassels about 2 stitches apart.

Sewing a Scarf

1. Choose your fabric and house colors. The best fabric to use for this method is fleece because it is warm and does not fray. Flannel will also work. Avoid using fabric that frays.
   • Gryffindor: Red & Gold
   • Hufflepuff: Yellow & Black
   • Ravenclaw: Blue & Bronze (books) or Blue & Silver (films)
   • Slytherin: Green and Silver
2. Cut your fabric into strips. The strips need to be 4 inches (10.16 centimeters) wide and 9 inches (22.86 centimeters) long. You will need 9 to 10 strips of each color.
3. Pin the strips together. Pin the strips with the right sides facing together, the long edges touching. When you are done, you should have a long strip that is 9 inches (22.86 centimeters) wide and about 60 inches (152.4 centimeters) long.
4. Sew the strips together using a ¼-inch (0.64-centimeter) seam allowance. Use a thread and bobbin color that matches one of your colors. Pull out the pins as you sew.
5. Press the seams open. Use an iron to go over each of the seams you just made, and press them open. This will help reduce bulk for your scarf.
6. Fold the scarf in half lengthwise. Make sure that the wrong sides are sticking out and the right sides are sticking on. Pin the scarf along the edges, if necessary.
7. Sew along the scarf's edge, excluding the first and last stripe. Use a ¼-inch (0.64-centimeter) seam allowance. Start sewing at the bottom of the second stripe, and stop sewing at the top of the second to last stripe. Do not sew across the narrow ends of the scarf.
   • Backstitch at the start and end of your sewing to keep the stitching from coming undone.
   • Trim off the tail ends of the thread.
8. Cut a fringe into the first and last stripes. Cut some slits into the first and last stripes, ½-inch (1.27-centimeters) apart. Try to cut through both layers of fabric. When you reach the folded edge, simply cut it apart.
9. Turn the scarf inside out. Make sure that you get all of the fringes out as well. For a neater finish, press the scarf flat with an iron. Focus on the side edges.
10. Sew across the ends of the scarf, right above the fringes. Sew across the top of the first stripe, and the bottom of the last stripe. Use a thread and bobbin color that matches the fabric.

Tips

• For an accurate scarf, knitting is better.
• If you have extra yarn leftover, you can make matching house mittens or hats.
• If you can crochet, it's a good substitute.
• Use circular needles if you want a scarf that has a knit texture on both sides. Use a stitch marker so that you know where your rows start and end. Press the scarf with an iron when you are done.

Things You'll Need

Knitting a Simple Scarf

• Two skeins of yarn of the same weight in your house colors
• Knitting needles
• Scissors
• Yarn needle

Knitting a Fancy Scarf

• Two skeins of yarn of the same weight in your house colors
• Knitting needles
• Scissors
• Yarn needle

Sewing a Scarf

• Fleece or flannel fabric in your house colors
• Measuring tape or ruler
• Fabric scissors
• Sewing pins
• Sewing machine
• Thread

Related Articles

• Knit a Basic Scarf
• Knit an Easy Beret
• Knit an Easy Hat
• Make a Shadow Knit Piano Scarf
• Make Tassels
• Change Yarn

Sources and Citations

See also

• Make a Shadow Knit Piano Scarf
• Knit a Scarf
• Make a Hat with a Knitting Loom
• Knit a Baby Hat
• Knit a Winter Scarf
• Knit a Beanie
• Knit an Infinity Scarf
• Knit an Easy Hat
• Knit a Basic Scarf
• Knit an Easy Hat for a Child

Read more ...

What links here

• Make a Harry Potter Halloween Costume