Make a Traditional Greek Frappe

The Greek frappé is thought to have been invented in 1957 at the annual Thessaloniki International Fair, when the Nestle sales representative discovered there was no hot water and needed to find an alternate way to serve instant coffee.[1] Since then, this foamy and refreshing drink has become very popular in Greece, especially during the warmer months. Several variations of the drink have evolved over the years, and these instructions will teach you how to make a traditional frappé that suits your tastes.

Steps

Shaking Up the Coffee

  1. Measure the coffee. Put two to three teaspoons of high-quality instant coffee into a shaker.
    • The original frappé from 1957 used Nescafe,[1] and most recipes for the drink call for the use of Nescafe Classic.[2]
    • If you can get the Greek version of Nescafe Classic, it is said to produce the best foam.[3]
  2. Add sugar. Depending on your personal preference, you can add anywhere from one to four teaspoons of sugar, or none at all.[4]
    • In Greece, a frappé with no sugar is described as "sketo," one with a moderate amount of sugar (one or two teaspoons) is referred to as "metrio" and one that is very sweet is called "glyko."[5]
  3. Add water. Next, add a small amount of water. Recipes vary with respect to how much water to add, with some calling for as little as two to three teaspoons (10-15ml),[6] and others as much as three tablespoons.[4]
    • You may need to experiment with this some to get it right. It's important that your coffee and sugar be covered with water, but too much water will decrease the foaminess of the drink.[6]
  4. Add ice if desired. If you wish, add two ice cubes in the shaker and close tight.
    • While some recipes suggest adding a couple of ice cubes to the shaker,[2] others indicate the water should not even be chilled.[6] Again, you may wish to experiment with this to get the consistency you like best.
  5. Shake it up. Close the shaker tightly and shake aggressively and quickly to create a thick, creamy foam.
    • You should shake the coffee for at least 15 seconds.[3]Many recipes call for a shake of 30 seconds or more.[2]
    • Instead of shaking, you can also use an immersion blender to mix up the coffee. Some prefer this shaking, both for ease and quality of foam.[4]

Mixing the Frappe

  1. Pour the coffee into a glass. Open the shaker and pour its contents into a tall glass.[4]
  2. Add ice. Add some ice cubes to the glass, filling it up half to two-thirds of the way.[4]
    • Some recipes suggest a smaller amount of ice, some as few as three to four ice cubes.[6] Once again, you can experiment with this and find the amount that's right for you.
  3. Add milk, if desired. Some people like milk in their frappé, while others find it more refreshing without.[6]
    • If you want milk in your frappé, you can either add one to two tablespoons of chilled milk,[6] or add two tablespoons of evaporated milk.[7]
    • In Greece, when ordering a frappé with milk, you order it "me gala."[5]
  4. Add water. Add cold water to fill the glass. Again, different recipes call for different amounts, with some calling for as little as two ounces,[4] and others as much as eight.[3] Experiment and find the amount that you like best.
  5. Stir with a straw. Always serve with a straw, as the drink will need to be stirred periodically during consumption to combine the froth with the liquid.[3]
    • Don't stir too much or too vigorously, or you will break up the froth.[8]

Tips

  • You can use an empty thermos flask instead of a mixer if you don't have one.
  • Don't be afraid to experiment with the amount of water, milk, and sugar. It may take you a few tries to make the frappé that suits your tastes.
  • Savor, don't gulp. A frappé is meant to be enjoyed slowly, sometimes over two to three hours.[5]
  • For this reason, it's a good idea to serve a frappé with a glass of cold water. That way, when you drink all the liquid and are left with only foam, you can add a little water, stir it up, and continue to enjoy your coffee.[5]

Warnings

  • Make sure you put the lid on the mixer securely and properly before you start shaking.
  • Don't add milk to the shaker. The foam may lose its stability.[6]

Sources and Citations