Prevent Skin Irritation After Shaving

Razor burn or bumps and dry, itching skin are common results from shaving. Anyone who shaves will experience skin irritation after shaving, caused by dull razors, dry skin or skin sensitivity. Use these tips to prevent skin irritation after you shave.

Steps

Developing Good Habits

  1. Wait until after your warm bath or shower to shave. Your warm (repeat: warm) shower or bath hydrates your skin, and it prepares your skin for shaving with a reduced risk of skin irritation. The softer your hair is, the easier it is to shave off cleanly.
    • Let your hairs soften and stand up from the warm water. The moisture and steam from your bath or shower cause your hairs to become soft and to raise against your skin. Softer hairs that are raised against your skin shave much more smoothly than areas that are not prepared for shaving.
    • Hold a warm, wet washcloth to the area for at least 5 minutes if you don't have the time or resources to shower.
  2. Exfoliate, exfoliate, exfoliate. Many people are guilty of skipping this super-imperative step. In fact, you should be doing it both before and after you shave. It may seem like a waste of time, but your skin will be smoother and less prone to redness and irritation.
    • When you exfoliate before, it aligns your hairs for a uniform shave and sweeps away the dead skin, allowing for a closer shave. When you do it after, it unclogs your pores (from the shaving and creams, etc.) and prevents ingrown hairs (that cause razor bumps).
  3. Always use a shaving lubricant. More on the specifics of creams and the like later, but using something to hydrate your skin is AN ABSOLUTE MUST. Do you feel like you're being yelled at? GOOD! ALWAYS USE SHAVING CREAM.
    • Crystal clear, right? Do not ever shave with just water. Soap and water is okay, but a cream designed especially for sensitive, to-be-shaved skin is best. And when you shave the same area twice, be sure to reapply.
  4. Shave in the direction of your hair growth. Use razor strokes that go downward. Applying pressure with your razor against the grain of your hair causes irritation and bumps. Generally, this means down.
    • Yep, shaving against the grain allows for a closer shave, sure. If that's what you want, go for it. But the likelihood of your skin getting irritated increases exponentially when you do so.
  5. Use short, light strokes. The two sort of work in tandem, actually. When your stroke is short, you tend to be lighter on your skin. If the stroke is too long, you feel as if the razor dulls and you need more pressure to combat that. Resist!
    • You'll also be washing in between strokes -- so the shorter the stroke, the easier you are on your razor. That's good for your wallet and your skin!
  6. Rinse with cold water and pat dry. Just how warm water will open up the pores, cold water will seal them off, cinching the deal. After the cold water rinse, pat the area dry. Don't rub! Rubbing is just an invitation for disaster. You did it well -- don't mess it up!

Using the Right Products

  1. Get a new razor. Using a dull razor causes unnecessary irritation to skin under all conditions. Instead of gliding across your skin, a dull razor drags, which causes more irritation. Imagine it chipping away at your skin -- no thank you![1]
    • You can reuse your razor a few times if you take good care of it. Make sure to wash it after every swipe. Don't leave it wet though, as water can erode at the metal, too. Clean it with rubbing alcohol to kill all the bacteria for extra precaution.[2]
  2. Men, purchase a badger brush. You may think lathering up is all you need do, but a badger brush really works in your shaving cream to the hairs, resulting in a cleaner, smoother shave.
    • You may also want to look into a safety razor. It's a single blade that provides a clean cut. The blades are cheap, too![3]
  3. Use shaving cream with aloe or other ingredients intended for sensitive skin. Wait until halfway through your bath or shower to apply the shaving cream. Allow it to sit on your skin for at least 3 minutes to soften the hairs. The aloe and other ingredients in the shaving cream create a surface that yields a smoother shave with less irritation.
    • Gentlemen, you may be better off with your girlfriend's shaving cream. Products marketed toward women's legs are often a bit more hydrating and skin-softening.[4] You can handle a pink can, right?
  4. Apply hydrocortisone cream or salve after shaving. Do this immediately after shaving to reduce the sting and redness caused by your razor. The salve works to soothe the skin and heal any irritation.
    • Refrain from using hydrocortisone cream daily. Regular application causes skin to become used to it, which reduces its effectiveness. Regular use can cause skin to thin.
  5. Put on lotion after shaving. Use a moisturizing, unscented, unperfumed lotion on the shaved area. Lotions reduce the impact of dry skin that results from shaving, which causes many skin irritation symptoms.
    • Bag Balm (available at places like Wal-Greens or CVS) is a great product for all things skin-hydrating. In reality, apply lotion all the time, not just after shaving.

Avoiding Further Irritation

  1. Cease shaving. Stop shaving and allow the hair to grow. Try this for a short time, even if it's not possible to do this as a long-term solution. The less often you shave, the fewer chances you have to get irritated skin.
    • Even just a few days will help your skin heal itself. If you're in dire straits, get a doctor's note telling school or work that you're free to grow that beard. Or that leg hair -- whichever.[3]
  2. Utilize a depilatory to remove hair. Depilatories dissolve hair at its root within the hair follicle. Using a depilatory reduces skin irritation caused by shaving. However, watch for allergic reactions to depilatories. Depilatories are approved for sensitive skin, but skin allergies do occur.
    • In case it wasn't clear, with this you won't be shaving. That's certainly one way to avoid razor burn and bumps!
  3. Put benzoyl peroxide salve or a razor bump cream on shaved areas. Apply 2.5- to 5-percent benzoyl peroxide on your skin immediately after shaving to reduce redness, irritation or bumps. Benzoyl peroxide was originally created as an acne treatment, but it is now a common treatment for the avoidance of razor burn.
    • There are a whole bunch of razor bump creams on the market that can be found at your local drugstore, like Bump Stopper and Tend Skin.[2] Use it as a preventative tactic if you are particularly prone to them.



Tips

  • Witch hazel is particularly soothing. If you're already suffering from skin irritation, slather it on. Itches be gone![3]

Warnings

  • Consult a physician about any irritated areas that appear to be infected or don't improve in a few days.

Related Articles

Sources and Citations

You may like