Rotate Tires on an Acura Integra
This is how to rotate the tires on an Acura Integra.
Steps
- First, obtain the following: Car Jack, Jack Stands, Tire Wrench or Tire Iron.
- Next, raise the car up off the ground, and secure it with the jack stands.
- After the car is up, remove the tires by using either a tire wrench or the tire iron.
- With tires removed, take the front left tire and rotate it to the rear right tire and swap the two.
- The front right tire goes to the rear left and vice versa
- Secure the tires back onto the car.
- Lower the car onto the ground.
- Inspect the tire pressure to make sure it is correct.
Tips
- Make sure you raise the car enough so that the tires are off the ground
- Make sure to finger tight the tire nuts before using a wrench
Things You'll Need
- Car Jack
- Jack Stands
- Tire Wrench or Tire Iron