Stop Your Headphone Cords from Tangling

It can be so frustrating to find that your headphone cords are tangled. This can happen to you if you have ever stuffed your headphones or earphone into your pocket or bag instead of storing them in a case or pouch. Untangle your headphones and store them properly so that you can be done with untangling once and for all.

Steps

Preventing Tangling

1. Store your headphones in a small case. If you do not have a case for storage, put them in a small pouch in your handbag or backpack so they can stay secured. Next time you use them, the cord will be wrapped rather than tangled.
   
   • Grab each of the ends. Starting from the earbuds, wrap your headphones around three of your fingers if you have larger hands, or four fingers if you have smaller hands. Stop wrapping when there is 3 inches (7.62 cm) left. Take out the wrapped part carefully, making sure that it doesn't come apart.
   • Wrap the remaining length of cord around the middle of the headphones. There should be enough cord left to wrap it around the headphones at least twice.
   • Tuck the end in. Once the entire cord has been wrapped around the headphones and you run out of cord to wrap, tuck the end of the cord into the part that’s already wrapped around. Check that it's secured tightly enough.
2. Wrap the headphones around an object. Take a small object, such as a pencil, a hairbrush, or a candle holder, and wrap the cord carefully around. This will hold the headphones in place so that they won’t tangle when not in use.
   
   • Tuck the end of the cord into the final loop while wrapping the cord around your object. This will secure the cord and will also allow for easy removal from the object.
3. Store your headphones in a small container. Find a small jar or a prescription bottle, and place your wrapped cord into the container. This way, the headphone cords will be unable to tangle since the small space will keep them in place.
   

Untangling the Cords

1. Unplug your headphones from your device. This will make the untangling process much easier as you can freely move the cord. Be sure to take your headphones off your head. Locate the ends that you put into your ears, often called the earbuds.
   
2. Spread the cord out on a flat surface. This way, you will be able to examine the cord and find out where it is tangled. Obtain a pen or pencil, as you may need this if the knots are so tight that you cannot untangle them with your hands alone.
   
3. Pull the loose end to loosen the closest knot. Pull the knot apart with your fingers, in order to loosen the cord and allow for easier untangling. If you cannot use your hands, use the tip of a pen or pencil to separate the cords that are knotted.
   
   • Work from the bottom up, since it is easier to untangle knots using a loose end.
4. Pull the loose end of the cord through the tangled area. This area should now look like hoop, which you can bring the rest of the cord through using your hands. Run the loose end of the cord underneath the knot.
   
5. Repeat these steps until each of the knots is untangled. You may have to loop the loose end of the cord through several different knots times before the entire cord becomes untangled. Be as patient with yourself as possible, since rushing the process can make the knots even worse.
   

Related Articles

• Wrap a Headphone Cord
• Use Computer Headphones
• Choose Headphones

References

See also

• Connect a HyperX Cloud Headset
• Connect a Headset to PC
• Wrap a Headphone Cord
• Fix Earphones when One Side Is Silent
• Be Street Smart with Headphones
• Put a Headset in Pairing Mode
• Send Audio to Earbuds from a TV That Doesn't Have Audio Out
• Install Headphones
• Clean Powerbeats 3
• Replace Earphone/Headphone Wires

Read more ...