Build a BMX Wooden Ramp

How to build a wooden BMX ramp in 5 easy steps and 6 tools and materials. You will need a few things so ask around your neighborhood and see if anyone has scraps or boards of wood.

Steps

1. Take a large piece of wood and cut 4 ramp shapes depending on how big you want your jump to be.
2. Cut groves in the ramp so you can place the support beams in (example-if the ramp is {{safesubst:#invoke:convert|convert}} from the bottom to the take off point cut groves every {{safesubst:#invoke:convert|convert}} .
3. Screw in the support boards to the two ramp cut outs.
4. Now you have a frame. Bolt that to a piece of wood so that it doesn't snap.
5. Screw or nail on plywood over the frame and you have a strong wooden ramp. Make sure ramp does not move or slide.

Warnings

• Electric Saws can be dangerous, so be careful using this item. Use under parental supervision.
• Ask parent before operating Saw to cut.
• Wear a helmet when riding a bike, especially when jumping ramps.

Things You'll Need

• Power saw
• Wood
• Screws
• Metal pipe if your putting a grinding rail at the top
• Plywood
• Drill

Related Articles

• Build Dirt Jumps (BMX/Hard Tail)
• Barspin on a BMX
• Roll in on a BMX
• Tailwhip a BMX Bike
• Wheelie on a BMX Bike
• Do an X up on a BMX
• Do a Fake Grind on BMX
• Flip on the Trampoline

See also

• Make a Kayak
• Make a Canoe
• Build a Trebuchet
• Make a Crossbow
• Build a Boat
• Make a Baseball Bat
• Carve Wooden Guns
• Build a Balance Board
• Build an Adjustable Dog Agility Seesaw
• Build a Fishing Chair

What links here

• Make a Pinewood Derby Racing Car
• Build a BMX Jump
• Backflip a BMX
• Make a Trampoline Bike
• Build a Mountain Bike Jump