Clean a Sprayer Head on a Kitchen Sink
Kitchen faucets can have two types of sprayers. Those that are attached to the main body of the faucet, and those that are located to one side of the faucet on the sink. Because both need to force the water through a series of small holes to produce the spray effect, they can quickly become clogged up with minerals and hard water deposits. When this happens, your sprayer may not work properly, or it may shoot the water out in odd angles, instead of straight down. If your sprayer is malfunctioning in this way, clean it to restore its function.
Contents
Steps
Examining the Sprayer Head
Some sprayer heads come loose from the rest of the faucet or sink, while others are integral and cannot be removed. Both can be cleaned, but the method of cleaning may differ.
- Pull out the sprayer and its hose so it is closer to you and easier to access.
- Look at the front section of the sprayer head where the aerator is located to check if the sprayer head is all in one piece, or if it appears to be in two pieces, with one piece very close to the spray portion.
- If the sprayer head is in two pieces, it more than likely comes apart.
- If it is in one piece, it will need to be cleaned intact.
Cleaning a Two-Piece Sprayer Head
Two-piece sprayer heads can be much faster to clean than one-piece sprayer heads because you can access all sides of the aerator when you take the piece apart.
- Grasp the two sections of the sprayer head. Hold the back section in your non-dominant hand and the front section, near the aerator, with your other hand.
- Twist the front aerator section to the left until it comes loose in your hand.
- Put down both pieces and put on protective rubber gloves.
- Hold the aerator in your non-dominant hand.
- Dip a small scrub brush or old toothbrush into a cleaning solution made for mineral deposits like CLR.
- Scrub both sides of the aerator with the mineral deposit cleaner until it’s clean. The mineral deposits may appear whitish in color; the aerator is clean when no white crust is left.
- Rinse the aerator with water.
- Screw it back onto the sprayer head.
Cleaning a One-Piece Sprayer Head
Even if your faucet does not come apart at the head, it can still be cleaned if it has begun to malfunction.
- Fill a large pot with a mineral deposit cleaner.
- Dilute the cleaner with hot water according to the manufacturer's instructions.
- Pull the sprayer out of its holder and toward you for easier access to the head.
- Dip the sprayer head into the cleaning solution.
- Leave it in place for 10 to 15 minutes to allow the solution time to dissolve the deposits inside and outside of the sprayer head.
- Rinse the sprayer with clean water.
Tips
- White vinegar can be an excellent cleaner for mild mineral deposits. Clean your sprayer head on a regular basis with it to help prevent major build up.
Warnings
- Mineral deposit cleaners can be strong. Wear gloves and always dilute according to the manufacturer's instructions when using it to prevent injury.
Things You'll Need
- Mineral deposit cleaner like CLR
- Water
- Scrub brush or old toothbrush
- Pan
Related Articles
- Clean a Scorched Pan
- Clean a Faucet
- Clean a Kitchen Table
- Clean a Kitchen Sink
- Avoid Kitchen Sink Blockages
- Clean Copper Cookware
- Arrange Dishes in Kitchen Cabinets
