Crack a "Master Lock" Combination Lock

If you don't know the combination to a Master Lock combination lock, you have a few options. If your lock is attached to something, you can break the lock, call a locksmith or use a shim. However, these options could put a dent in your wallet. Sometimes, your cheapest option is to figure out the combination.

Steps

  1. Note that a standard 40-digit Master Lock has 64,000 possible combinations that may open the lock. However, don't let that discourage you. If you don't know the serial number, then you can significantly narrow down the number of possible combinations to crack your lock (Method 1). If you know the serial number, you can request the combination directly from Master Lock (Method 2).

When You Don't Know Your Master Lock's Serial Number

  1. Turn the dial at least three rotations clockwise first, just to make sure it is clear. Turn the lock's dial clockwise to zero.
  2. Apply pressure on the shackle, which is the curved handle at the top of the padlock. Turn the dial clockwise (CW) slowly as you press the shackle. If you can't turn the dial at all from the zero point, release the shackle and turn the dial CW just a number or 2 and then try it again.
  3. Find the first sticking point.
    • As you turn the dial CW with tension on the shackle, you will come to the first clockwise stopping point where you can't turn the dial anymore. Make note of where it stops. Sometimes, the dial will stick right on the numbers, but sometimes the sticking point will be between the numbers. If so, record the number to the half (example: 22.5).
    • While continuing to apply tension to the shackle, turn the dial as far left (counter-clockwise) as you can. Make note of the first counter-clockwise (CCW) stopping point. The CCW stopping point and CW stopping point form your sticking "range", for example, 22.5 to 10. (Note: Some 800XXX and 908xxx locks have a two number sticking range [for example, 28 to 30 and 10 to 12].)
    • Determine the first sticking point by finding the number that's in the midpoint of the sticking range. A range of 4 and 5 would have a first sticking point of 4.5. A range of 22.5 and 23.5 would have a first sticking point of 23.
    • Each set of numbers that you find will have the same range. For example, one group may be 0.25 to 0.75 and another may be 0.5 to 0.25 on either side of the sticking points.
  4. Release the shackle tension and turn the dial clockwise slightly past the first sticking point. Turn the dial clockwise about one number higher from the first sticking point in order to allow you to "escape" that sticking point.
  5. Reapply tension to the shackle and continue turning the dial clockwise to find the rest of the sticking points. You should find 11 more sticking points, for a total of 12 sticking points in one complete turn of the dial. Write all 12 sticking points down.
  6. Find the third number of the combination.
    • Look at your list of sticking points and eliminate all those which are not whole numbers (that is, cross off any number that ends in 0.5). You should eliminate 7 of the 12 numbers with this step.
    • Of the remaining sticking points, choose the number with the unique digit in the "1s" position. Four of the remaining 5 numbers will share the same number in the "1s" place, so for example, if the numbers left on the list are 4, 14, 24, 27, and 34, the number 27 is the only number which does not have a 4 in the "ones" place. This is the third number of the combination.
    • If you only have four numbers remaining and they all share the same digit in the "1s" position, check the "note" above in step 3 about a 2-number range... the third number of your combination will be the number that has a 2-number range (for example, if you have 0, 30, 20, 10 left, but 20 has a range of 19 to 21, that would mean that your third combination number is 20).
  7. Find the magic number. Divide the third number of the combination (27 in this case) by four, and write down the remainder.
    • In this case 27/4 = 6 remainder 3. Remember that you are only concerned with the remainder, which will always be 0, 1, 2, or 3. If the third number of the combination is less than four, that is your magic number.
    • The remainder is the magic number. Write it down.
  8. Find the possible first numbers of the combination.
    • Add 4 to the magic number (3). Write down the result (7).
    • Now add 4 to that and continue adding 4 to each resulting sum until you have gone completely around the dial once. Write down each of these numbers.
    • For the example above, the numbers would be 3, 7, 11, 15, 19, 23, 27, 31, 35, and 39. One of these numbers is the first number of the combination. (Note: For some 800XXX locks, this will be the second number of the combination. The next set of numbers will be used as the first)
  9. Find the possible second numbers of the combination. If your magic number is 0 or 1, then add 2 to it. Otherwise, subtract 2 from the magic number.
    • Since the example magic number is 3, subtract 2 and get 1.
    • Write down the answer and add 4 to it. Now add 4 to each resulting sum until you have gone completely around the dial once.
    • In the example, the numbers would be 1, 5, 9, 13, 17, 21, 25, 29, 33, and 37. One of these numbers is the second number in the combination.
  10. Cross out the numbers plus or minus 2 from the third number of the combination. In this example, since 27 is the third number, you can cross 25 and 29 off your list of possible second numbers.
  11. Figure out the correct combination by trial and error. You now know all the possible first numbers (3, 7, 11, 15, 19, 23, 27, 31, 35, 39), all the possible second numbers (1, 5, 9, 13, 17, 21, 33, 37), and the third number (27). You've just narrowed down 64,000 combinations to only 80. Try every possible combination until you find the right one.
  12. For many Master Locks, you can use the following to help figure out the first number... Apply pressure on the shackle, Turn the dial counter-clockwise (CCW) slowly as you pull the shackle. Once per rotation it should stick. Look at the number when it sticks and add 5 to that value. Find the number you wrote down for the first digit (in step 9) that is nearest the sum. For example if the lock sticks at 17 when rotating CCW, you would write down 17+5=22, then look in the list above and determine that 23 is likely the first number of the combination. [It might not work for 800XXX locks, but it's still a good starting number to try.]
  13. Speed tip: You don't have to clear the lock to try each combination. You only have to clear the lock when the first or third number exceeds the second for the first time. So we would try 27-1-27, then rotate CW to 5 and CCW to 27, then CW to 9 and CCW to 27, then CW to 13 and CCW to 27, then CW to 17 and CCW to 27, then CW to 21 and CCW to 27, *now that the next number we would try is 33 which is greater than our first digit we would try 27-33-27, then CW to 37 and CCW to 27. The reason this works is the disk for the second digit isn't impacted when we rotate CCW, so we are effectively just setting the 2nd number to a bigger value. When the value gets too big then we effectively passed the first number *twice* and then picked our second digit -- which is why we have to reset when the 2nd number becomes bigger than the first.

When You Know Your Master Lock's Serial Number

  1. Download a "Lost Combination Form" from Master Lock. This can be found at: http://www.masterlock.com/pdfs/lost_combo_form.pdf. Wait to fill out your form until you meet with a notary public.
  2. Take your form to a notary public and ask to have the form notarized. You can usually find a notary at your local bank.
    • Fill out the form in the presence of the notary public. Have the appropriate ID that you'll need to confirm your identity.
    • Pay the notary's fee. Master Lock won't reimburse you for the charges.
  3. Photocopy your lock's serial number onto a piece of paper. The photocopy should show that your lock isn't attached to anything. Then, hand write the serial number beneath the picture of the lock.
  4. Mail your notarized form and photocopy to:
    • Master Lock Warehouse
    • 1600 W. La Quinta Rd.
    • Suite/WHSE #1
    • Nogales, AZ 85621
  5. Wait 4 to 6 weeks. Master Lock will process your request and send you your new combination.[1]

Tips

  • Google Play sells an Android app called Lock Hero that will take you through the process of cracking a Master Lock combination lock. The app will keep you from having to keep up with numbers on your own.
  • Sometimes the sticking points for finding the third number are not exactly on top of a number or between 2 numbers. In this case:
    • 1. Turn CW to the first of the 12 sticking points from 0.
    • 2. Continue to turn CW to the opposite side of the dial.
    • 3. Turn CCW back to the first sticking point from 0.
    • 4. Pull up on the lock and turn the dial left and right in the small sticking area and write down the exact range (for example, 2.75 to 3.5).
    • 5. Repeat this four more times for the numbers 10 more from each other (for example, 3, 13, 23, 33).
    • 6. Now repeat steps 1 to 5 for the second sticking point past 0.
    • 7. Do the steps again for the third point past 0.
  • If your lock has a key way on the back, you can drill a small hole next to it so that you can view the tumblers. After you align the tumblers, and determine the unlock code, you can seal the hole with a 2-part epoxy.
  • Only consider proceeding with Method 1 if you enjoy a challenge, or if your lock is extremely valuable. Otherwise, cutting off the lock and buying a new lock makes more sense.
  • If your lock is already open, but you don't know the combo, you can figure it out by pushing that lever out of the way and look into the inside with a flashlight. You can now see all three rings. Do the normal process of setting the combo to align all three notches in the visible area. Record the numbers as you do this. In order to open a closed lock, you'll have to add/subtract a number on the order of 6 or so to all three numbers you recorded to yield the actual combo. It's obvious what you have to do when you get all the notches aligned in the visible area.
  • The "sticking" method does not work on Master Lock Sphero Locks.
  • Call the company for help. Or visit the website.

Warnings

  • This procedure works with some Master Lock combination locks but may not work with all of them, particularly if the lock has no serial number. Some locks may not turn at all when the shackle is raised. According to rumors, Master Lock changed the combination algorithm on some of their locks, in particular those with serial numbers starting with the number 800.
  • Do not use this technique to crack someone else's lock without permission from them.

Things You'll Need

  • Master Lock "lost combination" form
  • Notary public stamp
  • Photocopy of serial number
  • Envelope and stamp
  • Master Lock combination lock
  • Paper and pencil to record numbers

Related Articles

Sources and Citations

  1. ↑ http://www.masterlock.com/faq/LostCombinations/

You may like

Retrieved from "https://kipkis.com/index.php?title=Crack_a_%22Master_Lock%22_Combination_Lock&oldid=270884"