Install Paint Protection Film for Your Car
Template:Stub All patterns are precisely cut to fit the entire area of your vehicle needing protection. Follow these simple steps for an accurate installation of your paint protection kit.
Steps
- Clean area of vehicle to be protected. Use the water with rubbing alcohol to remove any dirt and wax. It is always best to wash the vehicle first.
- Squeegee the water out from the center of the film outward. Work {{safesubst:#invoke:convert|convert}} at a time stretching when necessary. For areas or contours that need fast adhesion lift up the film and rinse using the alcohol water.
- Use the paper towels to dry the edges of the film and prevent the water from seeping back under the film. Dry film completely and apply a coat of sealer.
Things You'll Need
- Flexible squeegee
- Two sprayers with solutions of soapy water and water with a little rubbing alcohol
- Paper towels
- Plexus polish or other non-petroleum polish or sealer
