Make a Duct Tape Bow

Duct tape crafts are super fun to do and there is nothing easier than a duct tape bow! These bows are very pretty and you can be as creative as you like when it comes to experimenting with different colors and patterns. Below you will find two simple methods for making a duct tape bow - happy crafting!

Steps

Make a Folded Bow

  1. Get some colored duct tape. Duct tape is available in all sorts of colors and patterns, so choose some pretty, brightly colored ones to make your bow with. A good idea is to pick one color for the main part of your bow and another, contrasting color for the centerpiece.
  2. Cut two {{safesubst:#invoke:convert|convert}} strips of duct tape. Use a pair of sharp scissors to do this. The six inch pieces will make a pretty large bow, so if you'd prefer a smaller one, cut out two {{safesubst:#invoke:convert|convert}} pieces instead.
  3. Line up the two pieces of tape and stick the sticky sides to each other. Do this slowly and carefully to make sure the two pieces are exactly aligned. However, if you make a mistake, you can use your scissors to trim any extra bits off the edges. Try to make sure that there aren't any wrinkles and the bow will look better at the end!
    • At this point, you can feel free to decorate your strip of duct tape with any additional details, using markers or glitter pens.
  4. Fold the strip three ways. Fold the strip of duct tape three ways, going in opposite directions each time, as if you were making a fan.
  5. Tape the center of the bow. Pinch the middle of the folded duct tape between your fingers and wrap a thin strip (about 0.25 inches in width) of the other colored duct tape around the center, to secure. Make sure to keep your fingers out of the way or making a duct tape bow could turn into a sticky situation!
  6. Attach the bow to something. Once you have made the bow, you can stick it to whatever you like. One easy idea is to stick a bobby pin through the back of the wrapped piece of tape. Now you have a beautiful, customized bow to wear whenever you want! Alternatively, you could try attaching the bow to a headband or pinning it to a schoolbag or handbag.
  7. Finished.

Make a Basic Bow

  1. Choose your duct tape. Choose two contrasting colors of duct tape to make your bow.
  2. Cut out the center piece. Before you make the bow itself, it is a good idea to cut out a small strip of duct tape (about 0.25 inches, or about 0.64 centimeters, in width) for the centerpiece. This will make it easier to secure the bow later. Stick the strip of duct tape to the edge of a table where you can easily grab it.
  3. Cut out an {{safesubst:#invoke:convert|convert}} strip of duct tape. Taking the second roll of duct tape, cut out a piece {{safesubst:#invoke:convert|convert}} in length. Fold it neatly in half (lengthwise), sticky sides together, leaving just a small strip of adhesive exposed at the end.
  4. Stick the ends together. Take both ends of the strip of duct tape and curl them upwards, to form a circle. Stick the ends together, using the small strip of adhesive that you left exposed earlier. The duct tape should now form a circular shape, like a cuff.
  5. Pinch the center of the circle. Flatten the circle of duct tape and pinch the edges together, in the center, to form a bow shape.
  6. Secure the bow. Take the small strip of duct tape you cut out earlier and wrap it tightly around the center of the bow to secure.
  7. Attach the bow to anything you like! Stick it to a headband or barrette for a funky hair piece or attach it to bags, clothing, hats, etc.



Tips

  • Try using two different colors for the strips of tape, this makes the bow more appealing and eye-catching.
  • In the middle, try to not use the same color and make it look like a rainbow.

Things You'll Need

  • Duct tape in the colours of your choice
  • Scissors
  • Bobby Pin
  • Ruler

Related Articles

Sources and Citations

You may like

Retrieved from "https://kipkis.com/index.php?title=Make_a_Duct_Tape_Bow&oldid=358834"