Apply Spray on Bedliner to Your Truck
If you have a truck, you've probably had the need to apply bed-liner to your truck. If you have spray-on bed-liner, then it shouldn't be too hard at all!
Steps
- Tape off any areas that you do not want covered. This is very important, because the liner will not come off after it has dried.
- Scuff up any areas that the liner will be applied.
- Begin applying liner to the side walls of the truck bed and any corners or places that can't be reached with the help of Qwikliner cartridge spray gun.
- Now that all hard to reach areas have been applied, begin spraying on bed-liner.
- After you are finished applying the first complete coat, let it dry for about one to two hours. If necessary, proceed to apply a second coat.
- Remove the tape.
- You will want to let your bed dry for 2-3 hours before putting anything in it. Now you will have a new bed-liner that will not scratch and should last you the life of your vehicle.
Related Articles
- Apply Truck and Vehicle Lettering
- Park a Truck or Large Vehicle
- Drive a Tractor‐Trailer
- Secure Items in the Back of Your Truck
