Build a Xbox Battery Pack

This tells you how to build an XBox 360 battery pack which is very cheap to use and can be built in a short amount of time.

Steps

  1. Place a Rubber band or tape the two AA batteries together.
  2. Place them into the area where the battery pack would go.
  3. Rubber band or tape them into place so that the do not shift while you're playing.
  4. Place a conductive piece of metal in between the plastic part of the controller and the + - ports of the batteries (opposite side of the springs) if you place three pennies in there, the batteries should stay put/
  5. Turn on and enjoy.
  6. If this didn't work flip the + - end on the springs so they are backwards compared to how you had them before
  7. Finished.



Warnings

  • Be very careful when handling electronic objects, such as batteries, to prevent yourself from receiving an electric shock.

Things You'll Need

  • 2 AA batteries
  • 3-5 rubber bands or even some black electrical tape (hockey tape should work as well)
  • 1-3 pennies

Related Articles