Install LED Daytime Running Lights on a Mazda 3

High powered LED daytime running lights are OEM fit, replacing the stock fog lamp bezel for 3rd generation 2014-up Mazda 3. It doesn't matter if your Mazda 3 comes with factory equipped fog lamps or not, as it takes the place of the stock fog lamp bezel or the lower bumper grille. The OEM fit fog lights make your car appear like it came off the assembly line like that, definitely giving you all sorts of attention.

Steps

1. Remove the fog lamp bezel and insert the wire. Route the wires up to the engine bay.
2. Put the LED daytime running way the same way you removed the stock fog lamp bezel. Move all the wires to the driver side and connect the daytime running light wires to the module box.
3. Tap the wires. The black wire goes to the ground and the red wire to the fuse box ACC. Enjoy your new LED daytime running lights.

Tips

• Don't forget to test your LED daytime running lights!

References

• Mazda 3 LED Daytime Running Lights - resource source

See also

• Install Aftermarket Heated Seats in a Mazda MPV With Leather Upholstery
• Change a Tail Light Bulb on Nissan Versa Hatchback
• Reset Service Lights BMW X5 or X6 (E70 or E71)
• Turn off the "Maint Req" Light on a 2001 Honda Civic
• Change the Tag Lights in a Vehicle
• Replace Headlight Bulbs for Mercedes Benz C Class W203
• Fix a Faulty Seat Belt Warning Indication on a Mazda With Automatic Shoulder Belts
• Replace a Brake Light on a BME E90
• Change a 2008‐2012 Honda Accord Taillight
• Know if the Check Engine Light Is an Emission Problem

Read more ...