Install Underglow on a Car

Underglow kits are simple to install and usually only take 1 to 2 hours.

Steps

Make sure you have everything you need within arms reach.
Find a suitable area to mount the tubes to the undercarriage of your vehicle.
Use the hardware which should have been included in you purchase.
Screw the tubes to the car.
Run the wires under the car and up through the engine bay, be sure to secure the wires to the bottom of the car.
Once all wires are in the engine bay, plug them into the distributor box included in the purchase.
Wire the control box to the battery.
If the unit does not use a remote, you will need to run the wire into the car and hook it up to a switch on the dash.
Make sure you grounded the power line somewhere on your car.